PORTO Easy Access Concealed Cistern
Product Information
Specifications:
- Product Name: Easy Access Concealed Cistern
- Type: Bathroom cistern
- Installation: Concealed within the wall for a seamless look
- Material: Durable plastic
Product Usage Instructions
- Installation:
To install the Easy Access Concealed Cistern, follow these steps:- Prepare the wall for installation by ensuring it is strong enough to support the cistern.
- Cut an opening in the wall according to the cistern’s dimensions.
- Securely install the cistern within the wall cavity, ensuring it is level and securely attached.
- Connect the water supply and test for leaks.
- Usage:
Once installed, follow these guidelines for using the cistern:- Flush the toilet by pressing the flush button or lever connected to the cistern.
- If there are any issues with flushing or water flow, refer to the troubleshooting section of the manual.
Maintenance:
To ensure optimal performance, perform regular maintenance on the cistern:
- Check for any leaks or water wastage periodically.
- Clean the cistern components to prevent buildup and maintain proper functionality.
Frequently Asked Questions (FAQ):
- Q: How do I access the inside of the concealed cistern for maintenance?
A: Most concealed cisterns have a flush plate or access panel that can be easily removed to access the inner components for maintenance. - Q: Can I replace parts of the cistern myself?
A: It is recommended to consult a professional plumber for any repairs or part replacements to ensure proper installation and functionality. - Q: What should I do if my cistern is constantly running?
A: Check for any issues with the flush valve or float mechanism. Adjust or replace these components as needed to stop the constant running.
Product Description
- Remove the easy access cover plate.
- Assemble the cistern and fittings as shown in the diagram, making sure the cable is on the right-hand side as you face the front.
- Place the cable into the slot in the easy access cover plate and clip it into position. Avoid kinking the cable.
- Mark the position where the cistern will be fitted, ensuring there is at least a 20mm gap between the top of the cistern and the underside of the worktop when installing in a WC unit.
- Use the fixing bracket and fixing holes to secure the cistern into the WC unit or wall cavity.
- Measure and cut the flush pipe to size using a fine-toothed saw. Connect the flush pipe to the cistern using the coupling nut and washer.
- Mark the position for the flush button on the front of the WC unit or ducting, and drill a 40mm hole, ensuring there is enough room behind the fascia for the button housing.
- Fix the button into position by tightening the back nut. Clip the button housing onto the button, being careful not to bend or kink the cable.
- If required, adjust the water level in the cistern by turning the adjusting screw on the inlet valve.
- Connect and fix the WC pan according to the manufacturer’s instructions.
Documents / Resources
 |
PORTO Easy Access Concealed Cistern [pdf] Instruction Manual Easy Access Concealed Cistern, Concealed Cistern, Cistern |
