PORODO PD-WCDMIC-BK Lavalier Microphones with Type-C Connector and Lightning Adapter

Schematic View

1. Type-C Charging port
2. Charging Case Power Display
3. Mic On/Off Button
4. Mic M Button (Mute/Noise Cancellation)
5. Mic Connection/Noise Cancellation Indicator
6. Mute Indicator
7. Mic Charging Port
8. RX Type-C/lightning port
9. RX Type-C/lightning charging port
10. RX indicators

Specifications

Instructions for Use

[A] Power On/Off

Step 1: Press and hold the On/Off button on the microphone for 3 seconds. The indicators will turn green and red.
Step 2: Connect the receiver (RX) to your phone. Once connected, the RX indicator should turn green.

If the RX indicator does not light up green, please:

• Ensure your phone’s OTG setting is enabled. You may need to search for “OTG” in your phone settings to turn on the OTG power supply.
• Remove any case from your phone. After removing the case, reconnect the RX to your phone.

[B] Initial Use and Pairing Guide

1. Upon first use, both the microphone (MIC) and receiver (RX) will automatically enter pairing mode.
2. During this mode, the indicators on the MIC and RX will flash alternately in green and red.
3. Once the MIC and RX are successfully paired, the indicators will remain solid green and cease to blink.

When Connected

After the microphone (MIC) and receiver (RX) are connected, the MIC is ready for use. Launch any recording or live video app to capture audio.
Note: Some phones may not support using an external microphone with the built-in camera app. If your recordings have no sound, consider downloading alternative camera apps, such as OpenCamera, to ensure audio capture.

Mute Function

To mute the microphone, double-click the ‘M’ button. The indicator light will turn red to signify that the microphone is in mute mode. Double-click the button again to deactivate the mute and resume normal operation.

Noise Cancellation

1. When the microphone (MIC) is connected to the receiver (RX), noise cancellation is automatically enabled.
2. To toggle noise cancellation, press the ‘M’ button once to turn it off and press it again to turn it back on.
3. When noise cancellation is active, the indicator turns on with a solid green light. When it is turned off, the indicator flashes with a green light.

Turning Off the Microphone
Press and hold the On/Off button on the microphone for three seconds to power it off.

Charging Instructions

1. Charging the Microphone
   To charge the microphone (MIC) when the charging case is powered, place the MIC inside the casing which will start the charging. Please ensure to remove any stickers from the MIC before charging.
2. Charging the Case
   Connect the charging case to a power source using a charging cable. The case’s indicator lights will blink to display the current battery level.
3. Charging your Phone
   You can charge your phone through the receiver’s (RX) port. Use a Type-C cable for phones with a Type-C port and a Lightning cable for phones with a Lightning port.

Indicator Guide

MIC

Receiver

Package Contents

1. Microphone
2. Receiver
3. Charging Case
4. Type-C Charging Cable

Troubleshooting

1. No Sound from the Microphone
   Please verify the status of the MIC and RX indicators.
   • a. Both indicators are turned on with a solid green light. Samsung Phones: Use alternative apps instead of the built-in camera to capture sound. Google and One Plus Phones: Check compatibility. Some models may not support
     this microphone.
   • b. Indicator lights are flashing with green light. OPPO and VIVO Phones: Ensure that OTG is enabled in your phone settings.
2. Why is there noise when recording video, audio, or live streaming?
   Please try recording in a different location. It is recommended to avoid testing near 2.4G signals, such as Wi-Fi networks, base stations, etc. If Wi-Fi is enabled, please turn it off and try again.
3. Check the Battery Level of the Microphone and Charging Case

Microphone (MIC)

1. The MIC will automatically display the battery level as soon as it is turned on.
2. When the MIC is on, press the ‘M’ button to view the current battery level.

Charging Case

1. When the charging case is charging the MIC, it will automatically display the current battery level.
2. When the charging case itself is being charged, it will also automatically display the current battery level.

Warranty

Products that you buy directly from our Porodo website or shop come with a 24-month warranty. When you buy Porodo products from any of our approved sellers, you only get a 12-month warranty. If you want to extend this warranty, go to our website and fill out the form with your information. Don’t forget to upload a picture of the product too. After we’ve checked and accepted your request, we’ll send you an email to confirm that your product’s warranty has been extended.

For more info, please check: porodo.net/warranty

Contact Us
If you have any questions about this Privacy Policy, please contact us at:

• info@porodo.net
• Website: porodo.net
• Service Support: support@porodo.net
• Instagram: porodo

Documents / Resources

PORODO PD-WCDMIC-BK Lavalier Microphones with Type-C Connector and Lightning Adapter [pdf] Instructions PD-WCDMIC-BK Lavalier Microphones with Type-C Connector and Lightning Adapter, PD-WCDMIC-BK, Lavalier Microphones with Type-C Connector and Lightning Adapter, Type-C Connector and Lightning Adapter, Connector and Lightning Adapter, Lightning Adapter, Adapter

References

• User Manual