polyga HDI Compact USB User Guide

polyga HDI Compact USB-LOGO

polyga HDI Compact USB

polyga HDI Compact USB-PRO

DOWNLOAD FLEXSCAN3D

polyga HDI Compact USB-1

Log in to our website at https://www.polyga.com/my-account/ to download and install FlexScan3D.

CONNECT YOUR SCANNER

polyga HDI Compact USB-2

Plug in the power (12 VDC) and the USB cable into the scanner and your computer. Turn the scanner on.

ADD YOUR SCANNER

polyga HDI Compact USB-3

Start FlexScan3D. Under the Scanners tab, select New to add a scanner. Select your Scanner Type and click OK. Select the Project tab to begin scanning.

NOTE: Always power down the scanner before removing cables from the scanner.

Got questions? Contact support@polyga.com

Documents / Resources

PDF thumbnailHDI Compact USB
User Guide · HDI Compact USB, HDI USB, USB, HDI, Compact USB

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.