poly CCX500 Microsoft Teams IP Phone

Desk Phone Features

Feature Description

1. Touch screen—select items and navigate menus on the touch-sensitive screen.
2. Volume keys—adjusts the volume of the handset, headset, speaker, or the ringer.
3. Headset indicator—displays when the phone is powered on. The icon glows green or blue when a headset is connected and activated.
4. Speakerphone indicator—displays when the phone is powered on. The icon glows green when activated.
5. Mute key—mute or unmute the microphone during an active call.

Placing a call

Do one of the following

• Select Place a Call, enter a phone number, and select Dial .
• Select a favorite contact icon
• Select Contacts, select a directory, choose a contact, and select Dial.
•  Select Recent Calls and choose a contact.

Answering a call 

Select Answer

Placing a call on hold 

Select Hold while on an active call.

Retrieving a held call 

Select Resume

Ending a held call 

Select Resume then select Hang Up

Enable Do Not Disturb 

On the Home Screen, select DND

Transferring a call

Warm Transfer

1. While on an active call, select Consult
2. Dial the number of the other party or choose a contact, then select Dial.
3. When the destination party answers, provide the information and confirm that they would like to take the call.
4. Select Complete Transfer

Blind Transfer

1. While on an active call, select Transfer
2. Press the Blind soft key.
3. Dial the number of the other party or choose a contact, then select Dial .
4. The call is transferred immediately.

Voicemail Transfer

1. Press or the transfer soft key.
2. Press the Blind soft key.
3. Dial *0 plus the extension number of the voicemail where you want to transfer the call.

Parking a call

1. While on an active call, dial ##*3 .
2. Listen to the prompt indicating that the call has been parked. The prompt will also announce the extension where the call is parked.
3. Note the park location. Example *802.

Retrieving a Parked Call 

Press *, followed by the park location.

Forwarding Calls 

To forward an incoming call:

1. Select Forward.
2. Enter the contact’s number, then select Forward

To forward all incoming calls

1. Select Forward.
2. If you have more than one line, select a line.
3. Choose one of the following:
   1. Always
   2. No Answer
   3. Busy
4. Enter a contact’s number, then select Enable.

If you select No Answer, enter the number of rings before the phone forwards the call.

Paging

Dial *84, then follow the prompt.

Initiating an Intercom call

Press *85, then follow the prompt.

Recording a call

• While on an active call, dial *9 to start the recording.
• Press *9 to end the recording.

Accessing Voicemail 

1. On the Home screen, select Messages
2. You will be directly connected to the Message Center.
3. Enter your passcode and follow the prompt.

Documents / Resources

poly CCX500 Microsoft Teams IP Phone [pdf] User Guide CCX500, Microsoft Teams IP Phone

References

• User Manual