Polaroid 9027 Now I Type Instant Camera
IMPORTANT INFORMATION
USAGE AND OPERATION INSTRUCTIONS FOR LIGHT FITTING!
For your safety, mount and put the light fitting into operation based on the instructions. Preserve these instructions.
Identify the drawings on the product, on the data plate of the product, and in the instructions and take the warning texts into consideration.
Before the mounting, putting into operation or repair of the light fitting the circuit in question must be relieved from voltage. It is appropriate to switch off the cutout securing the circuit in question or if you do not know which one is the cutout, then, to switch off the cutouts of the consumption meter.
Fixed light fitting.
The product is only suitable for inside usage.
The light fitting must only be mounted and put into operation by a qualified electrician!
Make sure that you do not damage any electric cables when you are mounting the light fitting.
The colour codes of the wire are the following: black or brown (L) = phase conductor, blue (N) = neutral conductor, and in the case of a light fitting of shock protection class I: green-yellow =protecting conductor Y: If the outer flexible cable is damaged, only the producer or a similarly qualified electrician may exchange it.
The luminaire is also suitable for direct connection. Check the steps indicated on the assembly drawing before doing the connection.
The producer shall not be liable for incidental damages or accidents arising from non-standard connection and usage.
Only a light source of maximum performance and of the type indicated in the data plate and around the socket can be used for the product.
In case of the replacing of the bulbs first release the lamp fitting from tension (pull out the mains plug), and wait until the bulb is cool. Replace the bulbs as shown in the attached figure. Do not touch with your hands the halogen bulbs, use a soft cloth or a tissue to hold and put them in place.
To reduce the risk of strangulation the flexible wiring connected to this lumenaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
Do not clean the light fitting with detergents or abrasive materials and avoid the contact of liquids with electrical parts.
Our products comply with the relative European standards in each case (EN 60598) The symbol for separate waste collection means that the product must be collected separately, i.e. it cannot be placed in the same container with municipal waste. The product used may contain hazardous substances, mixtures and components that may pollute the environment and consequently endanger human health and life. It cannot be disposed of as unsorted municipal waste.
Importer: Rábalux Zrt. H-9027 Győr, Körtefa u. 5. Place of Origin: China
The detailed description of the markings shown on the packaging is available on the website www.rabalux.com.
Documents / Resources
 |
Polaroid 9027 Now I Type Instant Camera [pdf] User Guide 9027 Now I Type Instant Camera, 9027, Now I Type Instant Camera, Type Instant Camera, Instant Camera, Camera |
