PLT-13121 High Bay Occupancy Sensor and Photocell
Specifications
- Product Name: High Bay Occupancy Sensor and Photocell
- Catalog Number: PLT-13121
- Features: Automate existing UFO LED high bay fixtures, motion sensor for on/off control, light level adjustment based on occupancy, and light levels
DESCRIPTION
Automate existing UFO LED high bay fixtures by installing this microwave high bay occupancy sensor and photocell. Installing into the pre-installed port, this motion sensor turns the fixture on, off, and adjusts the light level depending on current light levels and room occupancy.
FEATURES
- Allows fixture to turn on or off automatically depending on the amount of light or activity detected in area; see Motion Sensor Specifications for information on factory settings
- Installs into pre-installed port on select LED UFO high bays; see Compatible Fixture section for full list of fixtures.
- Optional remote control available to adjust motion sensor settings including light levels and daylight sensing; remote must be less than 49 feet from the sensor/fixture that is being controlled; see PLTS-12281 for more information
LISTINGS
- RoHS
- IP65
THERMAL
- -22°F to 140°F (-30° to 60°C) operating temperature
ELECTRICAL
- Operating Current: 30mA
- Microwave Power: <0.5W
INSTALLATION
- Remove the plastic cap from the prongs, then simply screw into the pre-installed port on select LED UFO high bays; see Compatible Fixture section for full list of fixtures.
| Project name | Type |
| Catalog number | |
| Comments | Voltage |
| Approved by | Date |
WARRANTY
- 5-year limited warranty; see pltsolutions.com for warranty details
APPLICATIONS
- Warehouses
- Manufacturing Plants
- Distribution Centers
- Grocery Stores
- Gymnasiums
- Indoor Recreational Facilities
- Cold Storage
- Big Box Retail
- Service Repair Centers
PERFORMANCE SUMMARY
| Item # | Input Voltage | Dimming | Mounting Height | Detection Range | Finish | Compatible Remote |
|
PLT-13121 |
12±2V |
0-10V |
39.37’ (≤12m) Max |
6.58 to 13.12’ Max |
White |
PLTS-12281 |
MOTION SENSOR SPECIFICATIONS
| Input Voltage | 12±2V |
| Stand-by Power | <0.5W |
| Dimming | 0-10V |
| Mounting Height | 39.37’ (≤12m) Max |
| Sensor Range | 6.58 to 13.12’ Max |
| Detection Angle | 360° |
|
Default Setting* |
• Brightness – 100%
• Hold Time – 10 min • Standby Dim – 50% • Standby Time – 1 min • Sensitivity: 100% • Daylight – OFF |
| Brightness Setting** | 0%-100%
Quick Settings – 70%, 80%, 90%, 100% |
| Sensitivity Setting** | 20%, 50%, 75%, 100% |
| Hold Time Setting** | 10s, 1 min, 10 min, 30 min |
| Daylight Threshold** | 10 Lux, 30 Lux, 50 lux, 100 Lux, OFF |
| Stand-by Dimming Level** | 10%, 20%, 30%, 50% |
- Reset button on the PLTS-12281 remote returns sensor settings to these Default Settings. See PLTS-12281 for more information.
- Adjustable only with the PLTS-12281 remote. See PLTS-12281 for more information.
COMPATIBLE FIXTURES
| Linear High Bay SKUs | UFO High Bay SKUs |
| PLT-12379 | PLT-12558 |
| PLT-12380 | PLT-12559 |
| PLT-12414 | PLT-12560 |
| PLT-12686 | PLT-12561 |
| PLT-12687 | PLT-12562 |
| PLT-12722 | PLT-12563 |
| PLT-12723 | PLT-12564 |
| PLT-12724 | PLT-12565 |
| PLT-12726 | PLT-12566 |
| PLT-12728 | PLT-12567 |
| PLT-12729 | PLT-12568 |
| PLT-12730 | PLT-12569 |
| PLT-13080 | PLT-12570 |
| PLT-13082 | PLT-12630 |
| PLT-12631 | |
| PLT-12632 | |
| PLT-12633 | |
| PLT-12634 | |
| PLT-12635 | |
| PLT-12636 | |
| PLT-12637 | |
| PLT-12690 | |
| PLT-12691 | |
| PLT-12692 | |
| PLT-12693 | |
| PLT-12939 | |
| PLT-12980 | |
| PLT-12981 | |
| PLT-12707 | |
| PLT-13073 | |
| PLT-13074 | |
| PLT-13078 | |
| PLT-13077 |
DIMENSIONS
- Diameter: 2.2″
- Height – 1.57″
MOTION SENSOR COVERAGE
WARNINGS
- Plastic cap must be removed from the prongs before installing the sensor to the fixture.
FAQs
Q: How do I adjust the sensitivity of the sensor?
A: The sensitivity of the sensor can usually be adjusted using the controls provided on the sensor itself. Refer to the user manual for specific instructions.
Q: What is the recommended mounting height for the sensor?
A: The recommended mounting height for optimal performance is usually specified in the product documentation. Ensure to follow these guidelines for the best results.
Documents / Resources
 |
PLT PLT-13121 High Bay Occupancy Sensor and Photocell [pdf] Instructions PLT-13121 High Bay Occupancy Sensor and Photocell, PLT-13121, High Bay Occupancy Sensor and Photocell, Occupancy Sensor and Photocell, Sensor and Photocell |