PLT SOLUTIONS logoPLT-20283 Color Wattage Selectable UFO LED High Bay
Instruction ManualPLT SOLUTIONS PLT-20283 Color Wattage Selectable UFO LED High BayCOLOR/WATTAGE SELECTABLE UFO LED HIGH BAY

SAFETY AND INSTALLATION INSTRUCTIONS

⚠ WARNING

  • Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
  • To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards, read all warnings and instructions included with and on the fixture box and all fixture labels.
  • Proper grounding is required to ensure safety.
  • Power must be turned off at the breaker before installation or maintenance.
  • This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
  • Wear gloves and eye protection at all times while installing, servicing, or performing maintenance on the luminaire, and avoid direct eye exposure to the light source while it is on.
  • Do not install damaged product. Inspect luminaire for damage that may have occurred during transit. If damaged, contact the manufacturer immediately.
  • These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with installation,  operation, or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s or owner’s purposes, contact the manufacturer.

CAUTION

  • Carefully observe the grounding procedure in the installation section.
  • Tighten all fixture components to their recommended torque values.

Installation

Chain Mounting

  1. Attach the loop in the luminaire and tighten the locking screw.
  2. Attach the luminaire to the chain.
  3. Attach the safety cable to the fixture.
  4. Connect the wires.

PLT SOLUTIONS PLT-20283 Color Wattage Selectable UFO LED High Bay - Chain Mounting 1Conduit Mounting

  1. Attach the luminaire and tighten the conduit with locking screw.
  2. Attach the safety cable to the fixture.
  3. Connect the wires.

PLT SOLUTIONS PLT-20283 Color Wattage Selectable UFO LED High Bay - Chain Mounting 2

Wattage & CTT Sele ctable Guidance

PLT SOLUTIONS PLT-20283 Color Wattage Selectable UFO LED High Bay - Chain Mounting 3

Wiring Diagram

PLT SOLUTIONS PLT-20283 Color Wattage Selectable UFO LED High Bay - Wiring Diagram PLT SOLUTIONS logo972-535-0926
pltsolutions.com 
ver 121422

Documents / Resources

PLT SOLUTIONS PLT-20283 Color Wattage Selectable UFO LED High Bay [pdf] Instruction Manual
PLT-20283 Color Wattage Selectable UFO LED High Bay, PLT-20283, Color Wattage Selectable UFO LED High Bay, Selectable UFO LED High Bay, UFO LED High Bay, High Bay

References

Leave a comment

Your email address will not be published. Required fields are marked *