User Guide
13A 1G Socket
13A 1G SOCKET
WIRING GUIDE
| Product Description | 13A 1G SOCKET |
| Guarantee | 10 years |
| Certification | CE; UKCA; RoHS |
| Standards | BS 1363-2, BS EN 62368-1 |
| Product Class 1 | (For Indoor Use Only) Faceplate must be earthed |
| Operating Temp | -5C to 40C |
| Screw CC | 60.3mm |
| Rating | 13A 250V 50Hz – 60hz |
| Max Altitude | 2000m |
| Back Box Depth: | 25 mm (Minimum) depth |
For safe installation, follow local Building Regulations. If in any doubt, consult a registered electrician.
BEFORE STARTING ANY WORK, IT IS CRUCIAL TO ISOLATE THE MAINS POWER SUPPLY. THIS CAN BE DONE BY EITHER REMOVING THE FUSE BOX OR SWITCHING OFF THE CIRCUIT BREAKER.
WARNING: Do not apply products with metal faceplates directly to freshly plastered or damp surfaces as product may tarnish. If in doubt, use polythene as a temporary gasket to protect the product. Do not use masking tape on metal faceplates.
13A 2G SOCKET
WIRING GUIDE
| Product Description | 13A 1G SOCKET |
| Guarantee | 10 years |
| Certification | CE; UKCA; RoHS |
| Standards | BS 1363-2, EN 62368-1, BS EN 62368-1 |
| Product Class 1 | (For Indoor Use Only) Faceplate must be earthed |
| Operating Temp | -5C to 40C |
| Screw CC | 120.6 mm |
| Rating | 13A 250V 50Hz – 60hz |
| Max Altitude | 2000m |
| Back Box Depth: | 25 mm (Minimum) depth |
For safe installation, follow local Building Regulations. If in any doubt, consult a registered electrician.
BEFORE STARTING ANY WORK, IT IS CRUCIAL TO ISOLATE THE MAINS POWER SUPPLY. THIS CAN BE DONE BY EITHER REMOVING THE FUSE BOX OR SWITCHING OFF THE CIRCUIT BREAKER.
WARNING: Do not apply products with metal faceplates directly to freshly plastered or damp surfaces as product may tarnish. If in doubt, use polythene as a temporary gasket to protect the product. Do not use masking tape on metal faceplates.
13A 2G SOCKET + USB
WIRING GUIDE
Product Description : 13A Socket + 2 USB Ports A+C
| USB type | Type A & C |
| USB Output | PD/ QC 20W MAX |
| Guarantee | 3 years |
| Certification | CE; UKCA; RoHS |
| Standards | BS 1363-2, EN 62368-1, BS EN 62368-1 (For Indoor Use Only) |
| Product Class 1 | Faceplate must be earthed |
| Operating Temperature | -5C to 40C |
| Screw CC | 120.6mm |
| Voltage Rating | 13A 250V~ |
| Mains Frequency | 50Hz – 60hz |
| Max Installation Altitude | 2000m |
| IP Rating | IP2XD |
| Back Box Depth : | 25 mm (Minimum) depth |
For safe installation, follow local Building Regulations. If in any doubt, consult a registered electrician.
BEFORE STARTING ANY WORK, IT IS CRUCIAL TO ISOLATE THE MAINS POWER SUPPLY. THIS CAN BE DONE BY EITHER REMOVING THE FUSE BOX OR SWITCHING OFF THE CIRCUIT BREAKER.
WARNING: Do not apply products with metal faceplates directly to freshly plastered or damp surfaces as product may tarnish. If in doubt, use polythene as a temporary gasket to protect the product. Do not use masking tape on metal faceplates.
Documents / Resources
 |
plank 13A 1G Socket [pdf] User Guide 5061047320303, 5061047321881, 5061047320273, 5061047320280, 13A 1G Socket, 1G Socket, Socket |