VXE Dragonfly R1 User Manual
Models: VXE Dragonfly R1
01 Introduction
This section details the buttons and accessories of the VXE Dragonfly R1 mouse.
Mouse Components:
- 1. Type-C Port: For charging and wired connection.
- 2. Left Mouse Button: Primary click function.
- 3. Right Mouse Button: Secondary click function.
- 4. Scroll Wheel: For scrolling through content.
- 5. LED Indicator: Displays status information.
- 6. Forward Button: Side button for forward navigation.
- 7. Back Button: Side button for backward navigation.
- 8. Power Switch: Turns the mouse on or off.
- 9. DPI Button: Cycles through DPI settings.
- 10. Receiver Storage Slot: Stores the wireless receiver.
- 11. Optical Sensor: Tracks mouse movement.
- 12. Feet: Allows the mouse to glide smoothly.
Accessories:
- A. Cable: USB Type-C data cable.
- B. Mouse Feet: Replacement feet for the mouse. (Additional gifts B and C may be included with some versions.)
For more information, scan the QR code on WeChat.
02 Quick Start
Follow these steps to get started with your VXE Dragonfly R1.
1. Charging / Wired Mode:
Connect the mouse using the provided Type-C cable for charging or wired use. The rating is 5V=200mA.
2. Wireless Mode:
2-1. NearLink Wireless Mode: Connect the receiver for high-performance wireless connectivity. Recommended range is less than 2m, maximum range is over 10m.
2-2. Bluetooth Wireless Mode: Pair the mouse via Bluetooth for wireless connectivity.
3. Bluetooth Pairing:
Press and hold the left, middle, and right buttons until the indicator light flashes to enter Bluetooth pairing mode.
Software Download:
Download the latest software from VXE.COM.
4. DPI Adjustment:
Press the DPI button on the bottom of the mouse to cycle through DPI settings. The free drive provides the following DPI levels and status indications:
- Red Light: 400 DPI
- Green Light: 800 DPI
- Blue Light: 1600 DPI
- Purple Light: 3200 DPI
For more DPI settings (100-18000 DPI), use the VXE software.
5. Polling Rate Setting:
The polling rate can be adjusted directly through the VXE software.
6. Battery Status Indication:
- Blinking Red: Battery level below 10%, please charge.
- Blinking Yellow: Charging in progress.
- Solid Green: Charging complete.
Note: Contains a Lithium-ion battery. Refer to recycling instructions.