Juniper-LOGO

Juniper Deploying Apstra Virtual Appliance on Nutanix

Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix-PRODUCT

Download the Image

  1. Download the 5.1 Apstra VM Image for Linux KVM (QCOW2) from the Software Downloads page.
  2. Select the 5.1 version from the VERSION drop-down window.
    Byłyample filename for the 5.1 version is aos_server_5.1.0-117-189.qcow2.gz.
  3. Extract the disk image and then move it to the location where you want to install it.

Prześlij obraz

  1. Zaloguj się do konsoli Nutanix Prism Central.
  2. Navigate to the Image Configuration screen, or similar screen, depending on the version of Nutanix.
    Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (2)
  3. Click Upload Image, specify the name of the image, select the image type as DISK, and then upload the qcow2 file that you extraced earlier.Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (3)

Wdróż maszynę wirtualną

  1. In the Prism Central console, navigate to the VM section.Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (4)
  2. Click Create VM to start the wizard, and then enter the name of the VM in the Name edit box.Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (5)Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (6)
  3. Select Legacy BIOS in the Boot Configuration section.Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (7)
  4. Specify the number of vCPU(s) and cores per vCPU, and memory details.
    Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (8)
  5. Add a NIC to the VM by clicking Add New NIC in the Network Adapters (NIC) section.Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (9)
  6. Select the available subnet name from the drop-down window.Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (10)
  7. Save the VM settings and power it on.

Juniper-Deploying -Apstra -Virtual-Appliance-on-Nutanix  (1)Now you can configure your Apstra server.

Juniper Networks, logo Juniper Networks, Juniper i Junos są zarejestrowanymi znakami towarowymi Juniper Networks, Inc. w Stanach Zjednoczonych i innych krajach. Wszystkie inne znaki towarowe, znaki usługowe, zarejestrowane znaki towarowe lub zarejestrowane znaki usługowe są własnością ich odpowiednich właścicieli. Juniper Networks nie ponosi odpowiedzialności za jakiekolwiek nieścisłości w tym dokumencie. Juniper Networks zastrzega sobie prawo do zmiany, modyfikacji, przeniesienia lub w inny sposób rewizji tej publikacji bez powiadomienia. Copyright © 2025 Juniper Networks, Inc. Wszelkie prawa zastrzeżone.

Dokumenty / Zasoby

Juniper Deploying Apstra Virtual Appliance on Nutanix [plik PDF] Instrukcja użytkownika
Deploying Apstra Virtual Appliance on Nutanix, Apstra Virtual Appliance on Nutanix, Virtual Appliance on Nutanix, Appliance on Nutanix

Odniesienia

Zostaw komentarz

Twój adres e-mail nie zostanie opublikowany. Wymagane pola są oznaczone *