Wattstopper, a Legrand brand, specializes in advanced energy-efficient lighting controls, including occupancy sensors, DLM systems, and photosensors.
Wattstopper is a leading brand in the lighting control industry and a proud member of the Legrand family. Known for its innovative and energy-efficient solutions, Wattstopper provides a wide range of commercial and residential lighting control products. Their extensive offerings include advanced passive infrared (PIR) and ultrasonic occupancy sensors, comprehensive digital lighting management (DLM) systems, wireless IR configuration tools, and daylighting photosensors. By integrating these smart systems, Wattstopper helps building operators comply with rigorous energy codes while maximizing energy savings and user convenience without sacrificing reliability.
Najnowsze instrukcje od manuals+ specjalnie wyselekcjonowane dla tej marki.
Często zadawane pytania dotyczące instrukcji, rejestracji i wsparcia dla tej marki.
Wattstopper specializes in energy-efficient lighting control systems, including PIR and ultrasonic occupancy sensors, daylight photosensors, wall switches, and full digital lighting management (DLM) solutions.
Settings like time delay and sensitivity can be adjusted either via physical dials under the wall plate (on models like the WS-250) or remotely using a configuration tool like the LMCT-100-2 for DLM sensors.
Many sensors are designed to operate without a neutral wire, making retrofits easier. However, always refer to the specific wiring diagram in your sensor's installation manual to ensure correct setup.
Plug n' Go is a default setup mode in Wattstopper DLM systems. On power-up, it automatically configures connected sensors and room controllers to operate in the most energy-efficient manner without manual programming.