Equalizer Systems manufactures hydraulic and electric lifting, leveling, and slide-out systems for the RV, trailer, and commercial vehicle industries.
Systemy korektorów is a leading manufacturer of hydraulic and electric lifting, leveling, and slide-out solutions, primarily located in Elkhart, Indiana. The company specializes in systems for recreational vehicles (RVs), horse trailers, and specialty trucks, offering products like shaft-timed slide-out systems and hydraulic leveling jacks.
Uwaga: The brand name "Equalizer" is also shared by other entities, such as Equalizer Industries (Auto Glass Tools) and the Equal-i-zer Hitch. The manuals provided in this category frequently cover Equalizer Systems' RV components, including troubleshooting guides for slide-out height adjustments, timing shaft replacements, and cylinder rod clearance.
Najnowsze instrukcje od manuals+ specjalnie wyselekcjonowane dla tej marki.
Często zadawane pytania dotyczące instrukcji, rejestracji i wsparcia dla tej marki.
Equalizer Systems slide-out mechanisms are designed to operate without added lubrication, as grease can trap dirt and cause premature wear. A coating of WD40 or silicone spray can be applied to prevent rust.
Height adjustment is made via bolts at the end of the inner slide-out rail. For non-flat floors, the dimension from the bottom of the slide box to the top of the inner rail (B) must be equal to or greater than the dimension at the other end (A).
If the cylinder rod bows, adjust the rod end jam nuts so that the cylinder is fully extended at the same time the slide room is fully extended. This prevents contact with the timing shaft.
You can contact Equalizer Systems at 800-846-9659 (based on manual data). Please obtain prior authorization for warranty service.