Wstęp
Thank you for choosing the ChunHee Dog Training Bell. This device is designed to facilitate communication between you and your dog, helping to signal when they need to go outside for potty breaks or play. By using this manual, you will learn how to set up, operate, and maintain your training bell for optimal performance and a positive training experience.
Produkt ponadview
The ChunHee Dog Training Bell features a large, easy-to-press button, adjustable volume, and multiple sound options, including voice commands. It is designed to be chew-proof and durable for long-term use.
Image: The ChunHee Dog Training Bell, showing a dog's paw interacting with the large button featuring a paw print design.
Główne cechy:
- Regulowana głośność: 0-115dB with 5 levels.
- 28 Custom Sounds: Includes tones, ringtones, and voice commands.
- Chew-Proof Design: Trwała konstrukcja zapewniająca długowieczność.
- Łatwa instalacja: No tools required, uses adhesive mounting.
- Długa żywotność baterii: Działa na 2 baterie AAA (w zestawie).
Image: A visual comparison highlighting the features of the ChunHee Smart Dog Door Bell, such as adjustable volume, multiple ringtones, and smooth surface, against limitations of traditional dog doorbells.
Organizować coś
1. Instalacja baterii
- Twist the base of the doorbell counter-clockwise to open the back cover.
- Insert 2 AAA batteries into the battery compartment, ensuring correct polarity (+/-).
- Replace the back cover by twisting it clockwise until secure.
Image: Step-by-step guide for battery replacement, showing how to open the back cover, insert AAA batteries, and secure the cover.
2. Mounting the Bell
The ChunHee Dog Training Bell can be mounted on various surfaces using the included adhesive tape. Choose a location easily accessible by your dog, such as near a door or on a wall.
- Clean the desired surface thoroughly to ensure proper adhesion.
- Peel off the protective film from one side of the non-marking double-sided adhesive tape and apply it to the back of the bell.
- Peel off the remaining protective film and firmly press the bell onto the chosen surface for at least 30 seconds.
Image: Illustration of quick installation, showing the bell being mounted on a door, with options for wall or floor placement.
3. Adjusting Volume and Sound
- Regulacja głośności: Press the volume button (speaker icon) on the side of the bell to cycle through 5 volume levels (0-115dB).
- Wybór dźwięku: Press the music note button on the side to cycle through the 28 available tones, ringtones, and voice commands. Choose a sound that is distinct and easily recognizable by your dog.
Image: The dog training bell demonstrating its 5-level volume adjustment capability, suitable for various home environments.
Przewodnik operacyjny i szkoleniowy
Effective training requires consistency and positive reinforcement. Follow these steps to teach your dog to use the ChunHee Dog Training Bell:
- Step 1: Introduce the Doorbell
Let your dog explore the bell. Treat and reward any interest they show. Ensure they are comfortable with the sound it makes.
- Step 2: Teach to Touch
Cut treats into small pieces. When your dog touches the bell (even accidentally), say "Touch!" then "Yes!" and reward with a treat. You can also gently guide their paw to touch the bell.
- Step 3: Teach When to Ring
Before opening the door to go outside, ask your dog to touch the bell. Say "Yes!" and treat them. Repeat this every time you go out. Treat them again after they potty outside.
- Step 4: Be Patient
If your dog rings the bell to play, praise and treat them. If they ring for potty, praise and treat, then immediately take them outside. If they don't need to go, gently guide them back inside. They will learn the bell means potty time when it consistently leads to going outside for that purpose.
Image: A visual representation of the four-step training process: Introduce, Teach to Touch, Teach When to Ring, and Be Patient.
Wskazówki dotyczące sukcesu:
- Kluczem jest konsekwencja: Always respond to the bell and follow through with the intended action (e.g., going outside).
- Wzmocnienie pozytywne: Use treats, praise, and affection to reward desired behavior.
- Umieszczenie: Ensure the bell is placed at a height easily accessible by your dog's paw or nose.
- Polecenia głosowe: Utilize the voice command options (e.g., "outside," "potty") to reinforce the meaning of the bell.
Image: The dog training bell's sensitive trigger and large touch area, making it easy for dogs to activate with a paw, nose, or tongue.
Konserwacja
Wymiana baterii
The training bell uses 2 AAA batteries. When the sound becomes faint or the bell stops responding, it's time to replace the batteries. Follow the steps outlined in the "Setup" section for battery installation.
Czyszczenie
Wipe the surface of the bell with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the bell is completely dry before re-use.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Bell does not ring. | Niski poziom naładowania baterii lub rozładowane baterie. Nieprawidłowa instalacja baterii. | Replace batteries with fresh AAA batteries. Ensure batteries are inserted with correct polarity. |
| Sound is too quiet or too loud. | Ustawienie głośności nie jest optymalne. | Press the volume button to adjust to a suitable level. |
| Dog is not using the bell. | Insufficient training or inconsistent reinforcement. Bell placement is inconvenient. | Review the "Operating and Training Guide" and practice consistently. Ensure the bell is easily accessible to your dog. |
| Bell falls off the wall/door. | Surface was not clean before adhesion. Adhesive tape is worn. | Clean the surface thoroughly and reapply with new strong double-sided adhesive tape. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | CB10-WH/BU |
| Waga przedmiotu | 4.2 uncji |
| Wymiary (dł. x szer. x wys.) | 4.41 x 3.66 x 1.26 cala (opakowanie) |
| Baterie | 2 baterie AAA (w zestawie) |
| Zakres głośności | 0-115dB (5 levels) |
| Liczba dźwięków | 28 (tones, ringtones, voice commands) |
| Zawarte komponenty | 1 x Dog Button, 1 x Non-marking Double Sided Adhesive Tape, 1 x User Manual, 2 x AAA Battery |
| Producent | Chun Hee |
Gwarancja i wsparcie
Informacje o gwarancji
This ChunHee Dog Training Bell is covered by a Roczna gwarancja producenta od daty zakupu. Niniejsza gwarancja obejmuje wady materiałowe i wykonawcze powstałe w wyniku normalnego użytkowania. Nie obejmuje ona uszkodzeń spowodowanych niewłaściwym użytkowaniem, wypadkami, nieautoryzowanymi modyfikacjami ani normalnym zużyciem.
Obsługa klienta
For any questions, concerns, or technical assistance regarding your ChunHee Dog Training Bell, please contact our customer support team. Refer to the contact information provided with your purchase or visit the official ChunHee webstronie, aby uzyskać szczegółowe informacje na temat pomocy technicznej.
