Instrukcja obsługi falownika solarnego PowMr 10200W

1. Wprowadzenie

The PowMr 10200W Solar Inverter is a high-capacity, off-grid pure sine wave inverter designed for reliable power conversion from 48V DC to 220-230V AC. It integrates a 160A MPPT charge controller, supporting a maximum PV array power of 5400W. This versatile unit is suitable for various applications including homes, cabins, RVs, boats, and off-grid backup systems. It is compatible with both 48V lead-acid (Seal, AGM, Gel, Flooded) and lithium batteries.

Key features include dual PV input for uninterrupted power supply, dual AC output delivering up to 10200W, and multiple charging and output modes to optimize energy management. The inverter also incorporates comprehensive 360° safety protection against short-circuit, over/under-voltage, overload, and backfeed. An intuitive RGB light system indicates the current working mode of the inverter.

Figure 1: PowMr 10.2KW Hybrid Solar Inverter highlighting key specifications like 10.2KW AC output, 160A Max AC Charging Current, 500Vdc Max PV Array Open Circuit Voltage, 150V Starting Voltage, and 75W No-load Power Consumption.

2. Konfiguracja i instalacja

Proper installation is crucial for the safe and efficient operation of your PowMr Solar Inverter. Ensure all connections are secure and follow local electrical codes.

2.1 Rozpakowywanie i komponenty

Upon unboxing, verify that all components are present as listed in the packing list. The package typically includes the 10200W 220VAC Solar Inverter, an instruction manual, MC4 connectors, ring terminals, and other accessories.

2.2 połączeń przewodów

Follow these steps for wiring the inverter. Always ensure the system is de-energized before making any connections.

1. Podłączenie akumulatora: Connect the 48V battery first. Ensure proper polarity (+ to + and - to -).
2. Podłączenie wejścia AC: Connect the AC input wires (Live, Neutral, Ground) from your utility grid or generator to the designated AC input terminals.
3. Podłączenie wyjściowe prądu przemiennego: Connect your AC loads to the main AC output terminals. The inverter supports dual AC outputs.
4. Podłączenie wejściowe PV: Connect the solar panel array to the PV input terminals. Ensure correct polarity and voltage within the specified range (Max PV Array 5400W, Max PV Input VOC: 500V DC).

Figure 2: Diagram illustrating the dual MPPT input for solar panels, supporting a maximum PV array power of 10200W and MAX PV Input of 500VDC.

2.3 Ochrona bezpieczeństwa

The inverter features 360° safety protection, including short-circuit, over/under-voltage, overload, and backfeed protection. Always ensure proper grounding and use appropriate circuit breakers for all connections.

Figure 3: Visual representation of the inverter's 360° protection, including short circuit, over current, over voltage, pod voltage, zabezpieczenie przed przeciążeniem, zasypaniem, przegrzaniem i przeładowaniem.

3. Instrukcja obsługi

The PowMr Solar Inverter offers flexible operating modes to suit various energy needs.

3.1 Wiele trybów ładowania

The inverter supports three optional charging modes:

• Solar First (CSO): Priorytetem ładowania jest energia słoneczna.
• Solar & Utility (SNU, default): Do ładowania wykorzystuje energię słoneczną i energię sieciową.
• Only Solar (OSO): Ładowanie wyłącznie przy użyciu energii słonecznej.

3.2 tryby wyjściowe

Three output modes are available to ensure uninterrupted power:

• Najpierw energia słoneczna: Nadaje priorytet wykorzystaniu energii słonecznej w przypadku obciążeń.
• Najpierw dania główne: Prioritizes utility grid power for loads.
• Priorytet SBU: Priorytetem jest energia słoneczna, następnie akumulator, a na końcu zasilanie użytkowe.

3.3 Wskaźniki świetlne RGB

The PowMr Hybrid Inverter's logo displays different colors to indicate its working mode:

• Białe światło: Tryb stacjonarny
• Fioletowe światło: Tryb fotowoltaiczny
• Czerwone światło: Tryb baterii
• Niebieskie światło: Tryb użytkowy

3.4 Dual Output Functionality

The inverter features dual AC outputs. In areas with frequent power outages, you can set a higher battery voltage for critical loads to retain more power for use in the event of a blackout. When the battery voltage falls below a set value, the main load port stops working, and only the second load port remains active. When the battery voltage is higher than the set value, the main load port operates again.

4. Konserwacja

Regular maintenance ensures the longevity and optimal performance of your solar inverter. Keep the inverter clean and free from dust. Periodically check all wiring connections for tightness and signs of wear or corrosion. Ensure adequate ventilation around the unit to prevent overheating. Refer to the full instruction manual for detailed maintenance procedures and schedules.

5. Rozwiązywanie Problemów

If you encounter issues with your inverter, consult the troubleshooting section of the comprehensive manual for common problems and solutions. Basic troubleshooting steps often involve checking connections, verifying battery and PV voltages, and observing error codes displayed on the LCD screen. For persistent issues, contact customer support.

6. Specyfikacje

7. Gwarancja i wsparcie

PowMr is committed to providing excellent after-sales support. For any inquiries, technical assistance, or warranty claims, please refer to the contact information provided in your product packaging or visit the official PowMr webStrona. Upewnij się, że masz pod ręką numer modelu produktu i dane dotyczące zakupu, kontaktując się z pomocą techniczną.