Instrukcja obsługi słuchawek dodatkowych Avantree AS50Q do telewizora Ensemble

1. Koniec produktuview

The Avantree AS50Q are add-on headphones designed to expand your Avantree Ensemble TV watching experience. These headphones are compatible with specific batches of the Avantree Ensemble TV set (T24B1 or T24D2 and later). They offer extended playtime, a comfortable fit, and ensure no lip-sync delays when used with the Ensemble transmitter.

Figure 1: Avantree AS50Q Add-On Headphones. These black over-ear headphones feature soft earcups and an adjustable headband for comfortable wear.

Główne cechy:

• Add-On Design: Specifically designed as additional headphones for the Avantree Ensemble TV watching set (batches T24B1 or T24D2 and later).
• Wydłużony czas gry: Enjoy up to 35 hours of continuous audio on a single charge.
• Lekkie i wygodne: Features soft, spacious earpads and an adjustable headband for prolonged use.
• Brak opóźnień w synchronizacji ruchu warg: When paired with the Ensemble transmitter, experience perfectly synchronized audio and visuals with less than 40ms of delay.
• Daleki zasięg: Maintain a stable signal up to 100ft / 30m from the Ensemble transmitter.

2. Konfiguracja

2.1. Co znajduje się w pudełku

Figure 2: Contents of the Avantree AS50Q package. Includes the AS50Q Add-On Headphones, a Type C Charging Cable, and a 3.5mm AUX Cable.

• AS50Q Add-On Headphones
• Kabel ładujący typu C.
• 3.5mm AUX Cable (Note: While included, the primary function is as an add-on to the Ensemble TV set's transmitter for wireless audio.)

Ważny: The Avantree Ensemble TV set transmitter and charging dock are NOT included with these add-on headphones. These headphones are designed to pair with an existing Avantree Ensemble transmitter.

2.2. Sprawdzenie zgodności

The AS50Q headphones are compatible with Avantree Ensemble TV watching sets of batches T24B1 or T24D2 and later. To ensure compatibility, locate the "Lot No." on the bottom of your Ensemble transmitter.

Figure 3: Image illustrating the location of the "Lot No." on the bottom of an Avantree Ensemble transmitter, used to verify compatibility with AS50Q headphones. The headphones and transmitter are shown, with the transmitter greyed out to indicate it's not included.

2.3. Ładowanie początkowe

Before first use, fully charge your AS50Q headphones. Connect the provided Type C Charging Cable to the charging port on the headphones and to a USB power source. A full charge typically takes approximately 2 hours.

2.4. Pairing with Avantree Ensemble Transmitter

These headphones are designed to automatically pair with your existing Avantree Ensemble transmitter. Ensure your Ensemble transmitter is powered on and in pairing mode (refer to your Ensemble transmitter's manual for specific instructions). Power on the AS50Q headphones. They should automatically connect to the transmitter. If pairing does not occur automatically, consult the troubleshooting section or your Ensemble transmitter's manual for manual pairing instructions.

3. Działanie

3.1. Włączanie/wyłączanie zasilania

• Włączanie: Naciśnij i przytrzymaj przycisk zasilania na słuchawkach, aż zaświeci się dioda LED.
• Aby wyłączyć: Press and hold the Power button again until the LED indicator turns off.

3.2. Regulacja głośności

Adjust the volume directly on the AS50Q headphones using the dedicated volume buttons. You can also adjust the volume on your Avantree Ensemble transmitter or your TV, depending on your setup.

3.3. Extended Playtime

Figure 4: Image highlighting the extended playtime of the Avantree AS50Q headphones, showing "35 HRS" and a battery icon. The headphones are black and over-ear.

The AS50Q headphones provide up to 35 hours of battery life on a single charge, ensuring long periods of uninterrupted listening.

3.4. Wygodne dopasowanie

Figure 5: A person wearing the Avantree AS50Q headphones, smiling and relaxed, illustrating the comfortable fit provided by the soft earpads and adjustable headband.

Designed for comfort, the AS50Q features soft, spacious earpads and an adjustable headband, allowing for extended listening sessions without discomfort.

3.5. No Lip-Sync Delays

Figure 6: Visual representation of the Avantree AS50Q headphones and a greyed-out Ensemble transmitter, emphasizing "Ultra Low Latency" and "No Lip-Sync Delays" for synchronized audio and video.

When connected to the Avantree Ensemble transmitter, these headphones deliver audio with ultra-low latency (less than 40ms), ensuring that what you see on screen is perfectly synchronized with what you hear.

4. Konserwacja

• Czyszczenie: Do czyszczenia słuchawek używaj miękkiej, suchej ściereczki. Nie używaj płynów ani sprayów czyszczących.
• Składowanie: Przechowuj słuchawki w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
• Pielęgnacja baterii: Aby przedłużyć żywotność baterii, unikaj częstego całkowitego rozładowywania słuchawek. Ładuj je regularnie, nawet jeśli nie są używane przez dłuższy czas.
• Wymiana nauszników: Earpads may wear out over time. Contact Avantree support for replacement options if needed.

5. Rozwiązywanie Problemów

5.1. Brak dźwięku / Przerywany dźwięk

• Sprawdź parowanie: Ensure the AS50Q headphones are successfully paired with your Avantree Ensemble transmitter. Refer to your Ensemble manual for pairing instructions.
• Poziomy głośności: Verify that the volume on both the headphones and your TV/Ensemble transmitter is turned up.
• Zakres: Ensure the headphones are within the 100ft / 30m operating range of the Ensemble transmitter. Obstacles can reduce range.
• Poziom naładowania baterii: Charge the headphones fully. Low battery can affect performance.

5.2. Lip-Sync Delay Issues

• Ensemble Connection: Ensure the headphones are connected to the Avantree Ensemble transmitter, as this system is designed for ultra-low latency.
• Urządzenie źródłowe: Some older TVs or audio sources might introduce delays. Check your TV's audio settings for any delay compensation options.

5.3. Headphones Not Charging

• Połączenie kablowe: Ensure the Type C charging cable is securely connected to both the headphones and the USB power source.
• Źródło zasilania: Try a different USB power adapter or port to rule out a faulty power source.
• Port ładowania: Inspect the charging port on the headphones for any debris or damage.

6. Specyfikacje

7. Gwarancja i pomoc techniczna

For warranty information, technical support, or further assistance, please visit the official Avantree website or contact their customer service. Details can typically be found in the original product packaging or on the Avantree support page.

Zasoby internetowe:

• Visit the Avantree Store on Amazon

Relevant Product Video: