Zestaw alarmowy TOWODE WiFi Security Alarm System (model: domowy system alarmowy) – instrukcja obsługi
Kompleksowy przewodnik dotyczący konfiguracji, obsługi i konserwacji.
1. Koniec produktuview
This Wireless Security System kit provides comprehensive protection for your home, office, or shop. It includes a WiFi loud speaker, door/window sensors, and remote controls, all managed via the Tuya App.
Image 1: Complete TOWODE WiFi Security Alarm System Kit components.
2. Główne cechy
- Kompleksowa ochrona: Includes 6 door/window alarm sensors, 2 remote controls, 1 WiFi loud speaker, and 1 power plug for a complete security solution.
- Intelligent Security Management: Operates on a 2.4 GHz WiFi connection and offers remote control through the Tuya App (Android and iOS) for easy mode changes and device management.
- Natychmiastowe alerty: Sensors trigger a 120 dB loudspeaker alarm and send immediate notifications to your smartphone when doors or windows are opened.
- Rozszerzalny system: Supports up to 20 remote controls and 30 additional sensors (e.g., motion, water leakage) with 433MHz wireless frequency (eV1527 code).
- Tylko Wi-Fi 2.4 GHz: This product is exclusively compatible with 2.4 GHz WiFi networks and does not support 5G networks.
3. Konfiguracja i instalacja
3.1 Koniec komponentuview
WiFi Loud Speaker
Rysunek 2: Szczegółowy view of the WiFi Loud Speaker components.
Zdalne sterowanie
Image 3: Remote control for arming, disarming, SOS, and ringtone functions.
Czujnik drzwi/okna
Image 4: Wireless Door Alarm Sensor installation example.
3.2 Sensor Battery Installation
The door/window sensors come with batteries included, but an insulation sheet must be removed before first use. To replace the battery, follow these steps:
- Push the back panel of the sensor downward to remove it.
- Remove the insulation sheet or the old battery and install a new 12V battery (type 23A).
- Push the back panel upward to complete the installation.
Video 1: Demonstrates how to remove the insulation sheet and replace the battery in the D025 Door/Window Sensor (0:24-1:12).
3.3 App Configuration (Tuya Smart / Smart Life)
Before configuring the network, ensure your phone is connected to a 2.4 GHz WiFi network, Bluetooth is enabled, and Location Services are authorized for the Tuya Smart App.
Video 2: Guides through network configuration for the WiFi speaker using the Tuya Smart App (1:03-4:24).
3.4 Parowanie czujników i pilotów
3.4.1 Pairing with Standalone Speaker
- Unplug and plug the power cord of the standalone speaker three times to put it into pairing mode.
- Trigger the door sensor (open/close) within 6 seconds to pair.
- Unplug and replug the power cord to exit pairing mode.
Video 3: Demonstrates pairing a door sensor with a standalone speaker (1:13-1:25).
3.4.2 Pairing with WiFi Speaker via SET button
- Press the SET button on the WiFi speaker to put it into pairing mode.
- Trigger the door sensor (open/close) within 20 seconds to pair.
Video 4: Shows how to pair a door sensor with the WiFi speaker using the SET button (1:54-2:00).
3.4.3 Adding Accessories via App
To add additional sensors or remote controls through the Tuya App:
- Open the Tuya App and navigate to the 'Accessories' section.
- Press the '+' icon to enter pairing mode.
- Trigger the detector (e.g., open a door sensor, activate a motion sensor) or press a button on the remote control. The app will confirm successful addition.
Video 5: Demonstrates adding accessories like motion sensors and remote controls via the Tuya App (5:37-6:32).
3.5 Setting Detector Zone Modes
Each detector can be assigned a specific zone mode to determine how the WiFi Alarm Hub responds when triggered. The table below outlines the different modes:
| Detector Zone Mode | Rozbrajać | Ramię na wyjeździe | Uzbrojenie domu |
|---|---|---|---|
| Normalna | X | O | O |
| Opóźnienie | X | O | O |
| U siebie w domu | X | O | X |
| Home with Delay | X | O | X |
| 24 godzin | O | O | O |
| 24 Hours Silent | O | O | O |
| Wyłączony | X | X | X |
Note: "X" means the WiFi Alarm Hub will not trigger, "O" means the WiFi Alarm Hub will trigger.
Video 6: Instructions on how to set detector zone modes via the Tuya App (6:33-7:54).
4. Działanie
- Uzbrajanie: Use the Tuya App or the remote control to set the system to 'Away Arm' (all sensors monitored) or 'Home Arm' (perimeter sensors monitored).
- Rozbrajający: Use the Tuya App or the remote control to disarm the system.
- Powiadomienia: Receive real-time alerts on your smartphone when an alarm is triggered.
- Planowane uzbrajanie/rozbrajanie: Configure automatic arming and disarming times through the Tuya App.
5. Rozwiązywanie Problemów
- Brak połączenia z aplikacją: Ensure your WiFi network is 2.4 GHz. This system is not compatible with 5G networks. Verify Bluetooth and Location Services are enabled and authorized for the app.
- Brak parowania czujników: Ensure the insulation sheet is removed from the sensor battery. Follow the pairing instructions carefully, ensuring the speaker is in pairing mode and the sensor is triggered within the specified time.
- Fałszywe alarmy: Check sensor placement and ensure they are securely mounted. Avoid installing door contacts on metal doors, as this can interfere with operation.
- Problemy ze zdalnym sterowaniem: Verify the remote control battery is functional. Ensure the remote is paired correctly with the system.
6. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | TOWODY |
| Numer modelu | Home Alarm System |
| Technologia łączności | Wireless (2.4 GHz WiFi, 433MHz for sensors) |
| Poziom dźwięku | 120 decybeli |
| Metoda kontroli | Aplikacja, zdalny |
| Źródło zasilania | Battery Powered (6 x 12V batteries included for sensors) |
| Tworzywo | ABS |
| Wymiary produktu | Wymiary 15.3 x 15.3 x 8.5 cm |
| Waga przedmiotu | 690 gramów |
| Metoda instalacji | Screw-In/Self-Adhesive/Wall-Mounted |
