Instrukcja obsługi ramy łóżka IKEA SAGSTUA

Wstęp

The IKEA SAGSTUA bed frame features a classic design with distinctive brass-colored details on the headboard, footboard, and legs, adding a unique aesthetic to your bedroom. This manual provides essential information for the proper assembly, safe use, and effective maintenance of your bed frame.

Please read these instructions carefully before beginning assembly or use to ensure stability and longevity of the product.

Konfiguracja i montaż

Before starting assembly, ensure you have a clear, spacious area and that all components are present. It is recommended to assemble the bed frame with two people for ease and safety.

Wymagane narzędzia:

• Klucz imbusowy (zwykle dołączony do sprzętu)
• Wrench (if applicable, usually included)

Kroki montażu:

1. Unpack all parts from the packaging and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratches.
2. Identify all components by comparing them with the parts list provided in the separate assembly guide.
3. Follow the step-by-step numerical sequence in the included assembly guide to connect the headboard, footboard, side rails, and central support beam.
4. Secure all screws and fasteners firmly. Avoid overtightening until the entire frame is fully assembled to allow for minor adjustments.
5. Install the Luröy slatted bed base onto the frame according to its specific instructions, ensuring it is evenly distributed and securely seated.
6. Once the frame and slatted base are assembled, place your 140 x 200 cm mattress onto the bed.

Instrukcja obsługi

The IKEA SAGSTUA bed frame is designed to support a mattress of 140 x 200 cm. Ensure the mattress is correctly positioned on the slatted bed base to distribute weight evenly.

• Do not place excessive or concentrated weight on any single point of the bed frame.
• Avoid jumping on the bed, as this can stress the frame and potentially cause damage or injury.
• Ensure the bed is placed on a level surface to maintain stability and prevent wobbling.

Konserwacja

Regularna konserwacja pomoże zachować wygląd i integralność strukturalną ramy łóżka.

Czyszczenie:

• Wyczyść ramę łóżka za pomocąamp szmatką zwilżoną łagodnym środkiem czyszczącym.
• Dry thoroughly with a clean, soft cloth to prevent water spots or rust.
• Do not use abrasive cleaners, chemical solvents, or harsh detergents, as these can damage the powder coating and brass-colored details.

Kontrola:

• Periodically (e.g., every 3-6 months) check all screws, bolts, and fittings to ensure they remain tight.
• Retighten any loose fasteners to maintain the bed frame's stability and prevent squeaking.

Rozwiązywanie problemów

Jeśli masz problemy z ramą łóżka, zapoznaj się z poniższymi typowymi rozwiązaniami:

Piszczące dźwięki:

• Luźne elementy złączne: Check all bolts, screws, and connections. Tighten any that are loose.
• Podstawa łóżka z listew: Ensure the Luröy slatted bed base is correctly installed and not rubbing against the metal frame. Adjust its position if necessary.
• Mattress Position: Verify that the mattress is properly seated and not causing friction against the frame.

Niestabilność lub chwiejność:

• Kontrola montażu: Re-examine all connections and ensure they are securely fastened according to the assembly instructions.
• Pozioma powierzchnia: Confirm that the bed frame is placed on a completely level floor. Uneven surfaces can cause instability.

Specyfikacje

Informacje dotyczące bezpieczeństwa

Podczas montażu i użytkowania należy przestrzegać następujących wytycznych bezpieczeństwa:

• Ostre krawędzie: Exercise caution with sharp edges on metal components during unpacking and assembly to prevent cuts or injuries.
• Stabilność: Always follow the provided assembly instructions precisely. Incorrect assembly can lead to instability and potential hazards.
• Waga: Handle all components with care due to their weight. Seek assistance when lifting or moving heavy parts to avoid strain or injury.
• Dzieci: Keep small children away from the assembly area due to small parts and potential pinch points.

Gwarancja i wsparcie

For information regarding warranty terms and conditions for your IKEA SAGSTUA bed frame, please refer to the documentation provided at the time of purchase. You can also find detailed warranty information on the official IKEA website or by contacting IKEA customer service.

For assistance with assembly, missing parts, or any other product-related inquiries, please contact IKEA customer support through their official website, local store, or designated customer service channels. Please have your model number (IK.492.689.07) and purchase details ready when contacting support.