Wstęp
This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Pure Loop 2 FX 360mm All-in-One (AIO) liquid cooler. Please read this manual thoroughly before proceeding with installation to ensure proper function and to prevent damage to your system components.
Image: The be quiet! Pure Loop 2 FX 360mm liquid cooler, showcasing the radiator, three ARGB fans, and the CPU block with integrated pump.
Informacje dotyczące bezpieczeństwa
Observe the following safety guidelines to prevent injury or damage to your product and system:
- Przed instalacją upewnij się, że komputer jest wyłączony i odłączony od gniazdka ściennego.
- Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
- Do not open the liquid cooler's sealed components, except for the designated refill port.
- Trzymaj produkt z dala od wilgoci i ekstremalnych temperatur.
- Przechowywać w miejscu niedostępnym dla dzieci.
Zawartość opakowania
Sprawdź, czy w opakowaniu znajdują się wszystkie komponenty:
- Pure Loop 2 FX 360mm AIO Liquid Cooler (Radiator, Pump/CPU Block, Tubing)
- 3x Light Wings 120mm PWM high-speed fans
- Koncentrator ARGB-PWM
- Sprzęt montażowy do gniazd Intel i AMD
- Pasta termiczna
- Coolant bottle for refilling
- Instrukcja obsługi (ten dokument)
Image: All components included in the be quiet! Pure Loop 2 FX 360mm package, laid out for inspection.
Konfiguracja i instalacja
Follow these steps for proper installation of the Pure Loop 2 FX 360mm liquid cooler. Refer to your motherboard and PC case manuals for specific guidance on component placement and cable routing.
1. Przygotuj gniazdo procesora
Identify your CPU socket type (Intel or AMD) and prepare the appropriate backplate and mounting brackets. Clean the CPU surface with isopropyl alcohol to remove any residue.
2. Montaż chłodnicy i wentylatorów
Mount the three Light Wings 120mm PWM fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling configuration (intake or exhaust). Secure the assembled radiator and fans into your PC case. The 360mm radiator typically mounts to the front or top of compatible cases.
Image: The Pure Loop 2 FX 360mm liquid cooler installed within a PC case, showing the radiator and fans mounted at the front, and the CPU block on the motherboard.
3. Nałóż pastę termoprzewodzącą
Apply a small amount of the included thermal paste to the center of your CPU's Integrated Heat Spreader (IHS). A pea-sized dot or a thin line is generally sufficient.
4. Mount the CPU Block
Carefully place the CPU block onto the CPU, aligning it with the mounting holes. Secure it with the appropriate screws and brackets for your socket type. Tighten screws in a diagonal pattern until snug, but do not overtighten.
- Intel Socket Compatibility: 1700 / 1200 / 2066 / 1150 / 1151 / 1155 / 2011(-3) Square ILM
- AMD Socket Compatibility: AM5 / AM4
Obraz: szczegółowy view of the be quiet! CPU block installed on a motherboard, showing the ARGB illumination and tubing connections.
5. Podłącz kable
Connect the pump's 3-pin power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. Connect the fan PWM cables and ARGB cables to the included ARGB-PWM-Hub. Connect the ARGB-PWM-Hub to a motherboard PWM fan header and a 5V ARGB header for synchronization.
Image: The be quiet! ARGB-PWM-Hub, illustrating its various connection ports for ARGB components and PWM fans.
Instrukcja obsługi
Once installed, the Pure Loop 2 FX 360mm operates automatically based on your motherboard's fan and pump control settings.
- Sterowanie PWM: The pump and fans are PWM controlled. You can adjust their speed curves via your motherboard's BIOS/UEFI settings or through compatible software. It is recommended to set the pump to run at 100% or a high fixed speed for optimal cooling performance and longevity.
- ARGB Illumination: The Light Wings fans and CPU block feature ARGB illumination. Connect the ARGB-PWM-Hub to a 5V ARGB header on your motherboard. Use your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects and synchronize them with other ARGB components.
Obraz: Zbliżenie view of a Light Wings fan, highlighting its vibrant ARGB LED illumination.
Konserwacja
The Pure Loop 2 FX 360mm is designed for long-term, low-maintenance operation. However, periodic checks and refilling are recommended.
- Czyszczenie kurzu: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush to maintain optimal airflow and cooling performance.
- Coolant Refill: The radiator features an easy-to-access refill port. Over time, a small amount of coolant may evaporate. If you notice a decrease in cooling performance or hear unusual pump noises, you may need to top up the coolant. Use only the provided coolant bottle or a compatible, high-quality AIO coolant.
Obraz: szczegółowy view of the refill port located on the radiator of the Pure Loop 2 FX, designed for easy coolant replenishment.
Rozwiązywanie problemów
If you encounter issues with your Pure Loop 2 FX 360mm, consider the following common solutions:
- Brak zasilania/brak świateł:
- Check all power connections to the pump, fans, and ARGB-PWM-Hub.
- Ensure the ARGB-PWM-Hub is connected to a 5V ARGB header on the motherboard.
- Verify motherboard BIOS settings for fan and pump headers.
- Wysokie temperatury procesora:
- Confirm the CPU block is securely mounted and making good contact with the CPU.
- Sprawdź czy pasta termoprzewodząca została nałożona prawidłowo.
- Ensure fans are spinning and oriented correctly for optimal airflow.
- Verify pump is running at an adequate speed (check BIOS/software).
- Inspect radiator for dust buildup and clean if necessary.
- Check coolant level via the refill port.
- Nietypowy hałas:
- Zidentyfikuj źródło hałasu (wentylatory lub pompa).
- If from fans, check for obstructions or adjust fan speed curves.
- If from the pump (gurgling/whining), it may indicate air in the loop or low coolant. Try gently tilting the PC case to dislodge air bubbles, or consider refilling coolant.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | BW015 |
| Rozmiar grzejnika | 360mm |
| Wymiary produktu | 15.63 x 4.72 x 2.05 cala (39.7 x 12 x 5.2 cm) |
| Waga | 5.73 funtów (2.6 kg) |
| Typ wentylatora | 3x Light Wings 120mm PWM high-speed fans |
| Maksymalna prędkość obrotowa | 1800 obr./min (wentylatory) |
| Poziom hałasu | 34 decybeli (maks.) |
| Metoda chłodzenia | Ciecz (Woda) |
| Tomtage | 12 wolty |
| Cotage | 5.4 watów |
| Kompatybilne urządzenia | Komputery stacjonarne |
| Zgodność z gniazdami Intel | 1700 / 1200 / 2066 / 1150 / 1151 / 1155 / 2011(-3) Square ILM |
| Zgodność gniazda AMD | AM5 / AM4 |
Gwarancja i wsparcie
be quiet! products are manufactured with high quality standards. For warranty information, please refer to the warranty card included with your product or visit the official be quiet! website. If you encounter any issues not covered in this troubleshooting section, please contact be quiet! customer support for assistance.
Official be quiet! Webstrona: www.bequiet.com
