Instrukcja obsługi glebogryzarki spalinowej SENIX 4QL 4-suwowej (TL4QL-L1)

1. Wprowadzenie

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your SENIX 4QL 4-Cycle Gas Powered Tiller Cultivator. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

The SENIX 4QL Tiller Cultivator is designed for preparing soil for planting, weeding, and general garden maintenance. It features a 46cc 4-cycle engine, offering a 15-inch tilling width and an 8-inch tilling depth.

2. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Operating gasoline engine equipment can expose you to chemicals including engine exhaust, carbon monoxide, and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear, when operating the tiller.
• Keep hands, feet, and clothing away from rotating tines.
• Upewnij się, że w miejscu pracy nie ma osób postronnych, dzieci ani zwierząt domowych.
• Never operate the tiller in an enclosed space due to the risk of carbon monoxide poisoning.
• Before performing any maintenance or clearing obstructions, always turn off the engine and ensure all moving parts have stopped.
• Handle fuel with extreme care. Store gasoline in an approved container in a well-ventilated area, away from ignition sources.

3. Montaż

The SENIX 4QL Tiller Cultivator requires minimal assembly. Typically, this involves attaching the handles and ensuring all components are securely fastened. Refer to the included assembly diagram for detailed steps.

• Zespół uchwytu: Attach the foldable handles to the main unit using the provided hardware. Ensure they are locked into the operating position before use.
• Regulacja kół: The wheels can be adjusted. Drop the wheels when not in use for storage or transport, and raise them when tilling.

Figure 3.1: Adjustable wheels for transport and tilling.

4. Konfiguracja

4.1 Tankowanie

The SENIX 4QL Tiller Cultivator is equipped with a 4-cycle engine. This means there is no need to mix gas and oil. Use fresh, unleaded gasoline with an octane rating of 87 or higher. The fuel tank capacity is 0.8 liters.

• Przed uzupełnieniem paliwa upewnij się, że silnik jest wyłączony i zimny.
• Refuel in a well-ventilated outdoor area.
• Nie przepełniaj zbiornika paliwa. Pozostaw miejsce na rozszerzanie się paliwa.

4.2 Olej silnikowy

The tiller includes engine oil. Before first use, ensure the engine oil level is correct. The oil tank capacity is 0.1 liters. Refer to the engine manual for specific oil type and checking procedures.

Figure 4.1: Engine view with fuel and oil components.

5. Instrukcja obsługi

5.1 Uruchomienie silnika

The SENIX 4QL Tiller features an auto choke and compression release for easy starting.

1. Ensure the fuel tank is filled and oil level is correct.
2. Move the choke lever to the 'START' position (if applicable, some models have auto-choke).
3. Naciśnij pompkę paliwa kilka razy, aż paliwo stanie się widoczne.
4. Mocno i płynnie pociągnij za linkę rozrusznika, aż silnik uruchomi się.
5. Po uruchomieniu silnika stopniowo przesuwaj dźwignię ssania do pozycji „PRACA”.

5.2 Uprawa

The tiller is equipped with 6 premium steel forward rotating tines, offering a 15-inch tilling width and 8-inch tilling depth.

• Ensure the adjustable wheels are in the raised position for tilling.
• Trzymaj mocno uchwyty obiema rękami.
• Engage the throttle to begin tilling.
• Guide the tiller slowly and steadily through the soil. Do not force the machine.
• The tiller is suitable for various terrains including dry ground, hard soil, muddy ground, and weedy ground.

Figure 5.1: Tilling width and depth capabilities.

Figure 5.2: Tiller suitability for various soil types.

5.3 Zatrzymywanie silnika

To stop the engine, release the throttle and move the engine switch to the 'OFF' position.

6. Konserwacja

Regular maintenance ensures the longevity and optimal performance of your tiller.

• Czystość: After each use, clean the tiller, especially the tines, to remove soil, debris, and plant matter.
• Kontrola zębów: Periodically check the tines for wear, damage, or obstructions. Remove any wrapped material like wire or roots.
• Wyjmowane ostrze: The tiller features a removable blade for convenient cleaning and maintenance. Refer to the manual for instructions on safe removal and reinstallation.
• Wymiana oleju: Follow the manufacturer's recommendations for regular engine oil changes.
• Filtr powietrza: Inspect and clean or replace the air filter as needed to ensure proper engine performance.

Figure 6.1: Removable blade for convenient cleaning.

7. Rozwiązywanie Problemów

If you encounter issues with your tiller, consult the following common troubleshooting tips:

If problems persist after attempting these solutions, please contact SENIX customer service.

8. Specyfikacje

9. Gwarancja i wsparcie

The SENIX 4QL Gas Powered Tiller Cultivator is backed by a 3-roczna ograniczona gwarancja. For warranty claims, technical assistance, or to order replacement parts, please contact SENIX customer service.

For further information and support, you may visit the official SENIX webodwiedź witrynę lub zapoznaj się z danymi kontaktowymi znajdującymi się na opakowaniu produktu.

10. Koniec produktuview Wideo