ZOTAC Gaming GeForce RTX 3090 AMP Instrukcja obsługi karty graficznej Extreme Holo

1. Wprowadzenie

This manual provides essential information for the installation, operation, and maintenance of your ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo graphics card. Please read this guide thoroughly before installation to ensure proper setup and optimal performance.

1.1 Produkt powyżejview

The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo is a high-performance graphics card built on the NVIDIA Ampere architecture. It features enhanced RT Cores and Tensor Cores, new streaming multiprocessors, and 24GB of GDDR6X memory, designed for demanding gaming and professional applications.

1.2 Główne cechy

• Nvidia Ampere architecture with 2nd Gen Ray Tracing Cores and 3rd Gen Tensor Cores
• 24GB 384-bit GDDR6X memory, 19.5 Gbps
• PCIe 4.0 interface
• HoloBlack design with SPECTRA 2.0 RGB Lighting
• IceStorm 2.0 Advanced Cooling system
• FREEZE Fan Stop and Active Fan Control
• PowerBoost technology
• Dual BIOS functionality
• Metal Frontplate and Lighted Backplate
• 8K Ready, 4 Display Ready, HDCP 2.3, VR Ready

2. Zawartość opakowania

Sprawdź, czy w opakowaniu produktu znajdują się wszystkie elementy wymienione poniżej:

• ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo graphics card
• 3x Dual 6-pin to 8-pin power adapter (if applicable)
• ZOTAC GAMING RGB GPU Support Bracket
• 3-pin RGB Header cable
• Instrukcja obsługi (ten dokument)

Image: Package contents including the graphics card, support bracket, and various cables.

Image: The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo graphics card alongside its retail packaging.

3. Konfiguracja

3.1 Wymagania systemowe

• Płyta główna: Gniazdo PCI Express 4.0 x16
• Zasilanie: Zalecany zasilacz 800-watowy
• System operacyjny: Windows 10 64-bitowy (kompilacja 2004 lub nowsza)
• Pamięć: Minimum 8GB system RAM (16GB recommended)
• Składowanie: 1.5GB available hard-disk space

3.2 Instalacja sprzętu

1. Przygotuj swój system: Wyłącz komputer i odłącz wszystkie kable. Otwórz obudowę komputera.
2. Zlokalizuj gniazdo PCIe: Identify an available PCI Express 4.0 x16 slot on your motherboard. Remove any expansion slot covers that obstruct the installation.
3. Zainstaluj kartę graficzną: Carefully align the graphics card with the PCIe slot and press down firmly until it is securely seated. Secure the card to the chassis with a screw.
4. Podłącz zasilanie: Connect three 8-pin PCIe power connectors from your power supply to the corresponding ports on the graphics card. Ensure all connections are firm. If your power supply does not have three 8-pin connectors, use the provided 6-pin to 8-pin adapters.
5. Install GPU Support Bracket: Attach the ZOTAC GAMING RGB GPU Support Bracket to prevent card sag, following the instructions provided with the bracket. Connect the 3-pin RGB Header cable from the bracket to the graphics card's RGB header.
6. Zamknij sprawę: Zamknij obudowę komputera i ponownie podłącz wszystkie kable.

3.3 Instalacja sterownika

After hardware installation, you must install the latest NVIDIA drivers for your graphics card. These drivers are crucial for optimal performance and stability.

• Pobierz sterowniki: Odwiedź oficjalną stronę firmy NVIDIA webStrona (www.nvidia.com/drivers) and download the latest Game Ready Drivers for the GeForce RTX 3090.
• Zainstaluj sterowniki: Run the downloaded installer and follow the on-screen instructions. A restart may be required after installation.
• NVIDIA GeForce Experience: Consider installing NVIDIA GeForce Experience for automatic driver updates, game optimization, and other features.

4. Obsługa karty graficznej

4.1 Połączenia wyświetlacza

The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo supports up to four simultaneous displays. Connect your monitors to the available ports:

• 3 x DisplayPort 1.4a (up to 7680x4320@60Hz)
• 1 x HDMI 2.1 (up to 7680x4320@60Hz)

Image: Display output ports on the graphics card, including DisplayPort and HDMI.

4.2 Software Features and Customization

Utilize ZOTAC's FireStorm utility for advanced control and customization of your graphics card.

• SPECTRA 2.0 RGB Lighting: Customize the RGB lighting effects on your card and the RGB GPU Support Bracket.
• IceStorm 2.0 Advanced Cooling: Monitor fan speeds and temperatures.
• Active Fan Control with FREEZE Fan Stop: Configure fan behavior, including stopping fans at low temperatures for silent operation.
• Podwójny BIOS: Switch between different BIOS profiles for performance or silent modes.
• Doładowanie mocy: Manage power delivery settings for enhanced stability.

Image: The graphics card's backplate featuring SPECTRA 2.0 RGB lighting.

Obraz: kątowy view karty graficznej, pokażasing the triple-fan IceStorm 2.0 cooling system and RGB accents.

5. Konserwacja

5.1 Czyszczenie

Regularne czyszczenie pomaga zachować optymalną wydajność i wydłużyć żywotność karty graficznej.

• Wyłączone: Always power off your computer and disconnect it from the power outlet before cleaning.
• Usuwanie kurzu: Use compressed air to gently remove dust from the fans, heatsink fins, and other components. Hold the fans in place to prevent over-spinning.
• Czyszczenie powierzchni: Delikatnie użyj miękkiej, niestrzępiącej się szmatki dampened with isopropyl alcohol to clean the card's exterior surfaces. Avoid getting liquid into connectors or components.

5.2 aktualizacji oprogramowania sprzętowego

Periodically check the ZOTAC support website for any available firmware updates for your graphics card. Firmware updates can improve performance, stability, or add new features.

6. Rozwiązywanie Problemów

Jeśli masz problemy z kartą graficzną, rozważ poniższe typowe kroki rozwiązywania problemów:

• Brak wyjścia wyświetlacza: Ensure the monitor cable is securely connected to the graphics card and the monitor. Verify that the graphics card is fully seated in the PCIe slot and all power connectors are attached. Try a different display output port or cable.
• Problemy ze sterownikiem: Reinstall the latest NVIDIA drivers. Use Display Driver Uninstaller (DDU) in Safe Mode to completely remove old drivers before installing new ones.
• Niestabilność/awarie systemu: Check your power supply wattage to ensure it meets the recommended 800W. Monitor GPU temperatures using ZOTAC FireStorm or other utilities to ensure it's not overheating. Ensure your system BIOS is up to date.
• Fan Noise/Malfunction: Check for any obstructions in the fan blades. Ensure Active Fan Control settings are configured correctly in FireStorm.
• Problemy z oświetleniem RGB: Verify the 3-pin RGB Header cable is correctly connected. Check settings within ZOTAC FireStorm software.

For persistent issues, refer to the ZOTAC support webodwiedź witrynę lub skontaktuj się z pomocą techniczną.

7. Specyfikacje techniczne

Obraz: Góra view of the graphics card, highlighting the IceStorm 2.0 triple-fan cooling solution.

8. Informacje o gwarancji

ZOTAC products are covered by a limited warranty. The ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo may be eligible for an extended warranty upon product registration. Please refer to the official ZOTAC website for the most current and detailed warranty terms and conditions, including registration requirements and regional variations.

Ważny: Any modification or improper use of the product may void the warranty.

9. Wsparcie

For customer service, technical support, or general inquiries regarding your ZOTAC Gaming GeForce RTX 3090 AMP Extreme Holo graphics card, please visit the dedicated support page on the official ZOTAC webstrona:

www.zotac.com/support

The support page offers FAQs, driver downloads, and contact information for technical assistance.