Produkt ponadview
The DELTA D75624SS is a 24-inch towel bar designed for bathroom use. It features a durable zinc construction with a stainless finish, providing both functionality and a modern aesthetic. This manual provides detailed instructions for safe installation, operation, and maintenance.

Image: DELTA D75624SS 24-inch Towel Bar. This image displays the complete towel bar assembly, including the bar and mounting posts, in a stainless steel finish.
Informacje dotyczące bezpieczeństwa
Przed instalacją i użytkowaniem należy uważnie przeczytać wszystkie instrukcje. Nieprzestrzeganie tych instrukcji może spowodować uszkodzenie mienia lub obrażenia ciała.
- Podczas montażu należy zawsze nosić odpowiedni sprzęt ochronny, na przykład okulary ochronne.
- Ensure the mounting surface is structurally sound and capable of supporting the towel bar and the weight of towels.
- Nie dokręcaj śrub zbyt mocno, gdyż może to spowodować uszkodzenie produktu lub powierzchni montażowej.
- Trzymaj małe części poza zasięgiem dzieci.
- Jeśli masz wątpliwości co do jakiegokolwiek etapu procesu instalacji, skonsultuj się z wykwalifikowanym specjalistą.
Zawartość opakowania
Przed rozpoczęciem instalacji sprawdź, czy wszystkie elementy są obecne. Jeśli brakuje którejkolwiek części lub jest ona uszkodzona, przerwij instalację i skontaktuj się z obsługą klienta.
- Towel Bar Assembly (1)
- Wsporniki montażowe (2)
- Śruby montażowe (4)
- Wall Anchors (4) (for drywall installation)
- Klucz sześciokątny (1)
Wymagane narzędzia
Do instalacji potrzebne są zazwyczaj następujące narzędzia:
- Ołówek
- Taśma miernicza
- Śrubokręt krzyżakowy
- Wywierć otwór odpowiednim wiertłem (np. 1/4 cala do kotew do płyt gipsowo-kartonowych)
- Poziom
Instrukcje instalacji
Follow these steps to properly install your DELTA D75624SS 24-inch towel bar.
Krok 1: Określ miejsce montażu
Choose a suitable location on your wall. Use a measuring tape and level to mark the desired height and ensure the towel bar will be level. The distance between the centers of the two mounting posts should be approximately 24 inches.
Step 2: Prepare Mounting Brackets
Separate the mounting brackets from the towel bar posts by loosening the set screws located on the underside of each post using the provided hex wrench. Keep the set screws and hex wrench in a safe place.
Step 3: Mark Drill Holes
Hold one mounting bracket against the wall at your marked location. Use a pencil to mark the positions for the two screw holes. Repeat this process for the second mounting bracket, ensuring it is level with the first and at the correct distance.
Krok 4: Wywierć otwory pilotujące
Using a drill, create pilot holes at the marked locations. If drilling into a wall stud, use a smaller drill bit appropriate for the mounting screws. If drilling into drywall without a stud, use a drill bit sized for the wall anchors (typically 1/4 inch). Insert the wall anchors flush with the wall surface if required.
Step 5: Secure Mounting Brackets
Align each mounting bracket with its respective pilot holes (and anchors, if used). Secure the brackets to the wall using the provided mounting screws and a Phillips head screwdriver. Ensure the brackets are firmly attached and level.
Step 6: Attach Towel Bar Posts
Slide the towel bar posts over the secured mounting brackets. Ensure the set screw holes on the underside of the posts align with the brackets. The towel bar should be centered between the posts.
Step 7: Tighten Set Screws
Using the hex wrench, tighten the set screws on the underside of each post. Tighten until the posts are securely fastened to the mounting brackets and the towel bar does not wobble. Do not overtighten.
Instrukcja obsługi
The DELTA D75624SS towel bar is designed for holding towels and other lightweight bathroom textiles. Ensure items placed on the bar do not exceed its structural capacity. Avoid hanging heavy objects or using the bar as a grab handle.
Konserwacja i pielęgnacja
To maintain the finish and appearance of your towel bar, follow these cleaning guidelines:
- Regularnie czyścić miękką,amp płótno.
- W przypadku uporczywych plam należy zastosować łagodny roztwór mydła i wody.
- Dokładnie spłucz czystą wodą i natychmiast osusz miękką ściereczką, aby zapobiec powstawaniu plam wodnych.
- Nie nie należy używać środków czyszczących o właściwościach ściernych, silnych środków chemicznych ani gąbek ściernych, gdyż mogą one uszkodzić wykończenie.
Rozwiązywanie problemów
If you encounter issues with your towel bar, refer to the following common solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Towel bar feels loose or wobbly. | Set screws are not fully tightened, or mounting brackets are loose. | Ensure the set screws on the underside of the posts are securely tightened with the hex wrench. Check if the mounting screws securing the brackets to the wall are tight. If wall anchors were used, ensure they are properly seated. |
| Rysy lub uszkodzenia wykończenia. | Use of abrasive cleaners or sharp objects. | Avoid using abrasive materials for cleaning. Minor scratches may be polished with a non-abrasive metal polish suitable for stainless steel, if desired. |
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Numer modelu | D75624SS |
| Marka | DELTA |
| Tworzywo | Cynk |
| Rodzaj wykończenia | Nierdzewny |
| Kolor | Nierdzewny |
| Wymiary produktu | 3.63 x 27.13 x 1.88 cale (głębokość x szerokość x wysokość) |
| Waga przedmiotu | 1.33 funta |
| UPC | 034449896597 |
Gwarancja i wsparcie
This DELTA product is covered by the manufacturer's limited warranty. For specific warranty details, claims, or technical support, please refer to the official DELTA website or contact their customer service department directly. Keep your proof of purchase for warranty purposes.
DELTA Customer Support:
- Webstrona: www.deltafaucet.com
- Phone: Refer to the webwitryna z regionalnymi numerami kontaktowymi.





