Memphis Audio CX23 3-Way Car Electronic Crossover Processor

1. Wprowadzenie

The Memphis Audio CX23 is a 3-way electronic crossover processor designed to provide precise control over your car audio system. This device allows for detailed signal processing before amplification, making it an ideal solution for multi-amplifier setups. It also incorporates an onboard line driver to enhance signal strength and clarity. This manual provides essential information for proper installation, operation, and maintenance of your CX23 crossover.

2. Główne cechy

• 3-Way Crossover functionality for precise frequency distribution.
• Bandpass capable rear channel for flexible speaker configuration.
• Includes a wired remote level control for convenient subwoofer adjustment.
• 7V Line Level Output for strong signal to ampwężownice.
• AUX Input for additional audio source connectivity.

3. Informacje dotyczące bezpieczeństwa

Please read all instructions carefully before installing and operating the CX23 crossover. Failure to follow these guidelines may result in damage to the unit, your vehicle, or personal injury.

• Zalecana profesjonalna instalacja: Installation of car audio electronics can be complex. If you are unsure about any part of the installation process, seek assistance from a qualified professional installer.
• Odłączenie zasilania: Always disconnect the vehicle's negative battery terminal before beginning any electrical work to prevent short circuits and damage.
• Prawidłowe okablowanie: Ensure all wiring is correctly routed and secured to prevent pinching, chafing, or shorting. Use appropriate gauge wire for power and ground connections.
• Wentylacja: Mount the unit in a location that allows for adequate ventilation to prevent overheating.
• Narażenie na wilgoć: Nie wystawiaj urządzenia na działanie wilgoci i ekstremalnych temperatur.
• Zabezpieczenie bezpiecznika: Always use the correct fuse rating as specified in the wiring diagram to protect the unit and the vehicle's electrical system.

4. Konfiguracja i instalacja

Proper installation is crucial for optimal performance. Plan your wiring carefully before making any connections.

4.1 Mounting the CX23

Choose a secure, dry location away from direct heat and moisture. Ensure there is enough space for wiring and ventilation. Use the provided mounting hardware to secure the unit.

Rycina 1: Przód view of the Memphis Audio CX23 Crossover Processor with the wired bass remote. This image shows the overall design and the connection point for the remote.

4.2 połączeń przewodów

Refer to the diagram below for proper wiring. All connections should be secure and insulated.

Figure 2: Rear panel of the Memphis Audio CX23 showing input and output RCA connections, remote bass control port, and power terminals.

1. Moc (12V): Connect the +12V terminal to a constant +12V power source from the vehicle's battery. Use an appropriate gauge wire and an inline fuse (not supplied, typically 1A-3A) as close to the battery as possible.
2. Zdalny (REM): Connect the REM terminal to the remote turn-on output of your head unit or other switched 12V source. This will turn the CX23 on and off with your audio system.
3. Masa (GND): Connect the GND terminal to a clean, solid chassis ground point in the vehicle. Ensure a good metal-to-metal connection.
4. Wejścia RCA:
   • Wejście z przodu: Connect RCA cables from your head unit's front output to the CX23's "FRONT INPUT" jacks.
   • Wejście tylne: Connect RCA cables from your head unit's rear output to the CX23's "REAR INPUT" jacks.
   • Dodatkowe wejście: Connect RCA cables from your head unit's subwoofer output (if available) to the CX23's "SUB INPUT" jacks. Alternatively, the CX23 can generate a subwoofer signal from the front/rear inputs.
   • Wejście AUX: If using an auxiliary source, connect it to the "AUX INPUT" jacks.
5. Wyjścia RCA:
   • Wyjście z przodu: Connect RCA cables from the CX23's "FRONT OUTPUT" jacks to your front channel ampwejścia lifier.
   • Rear Output: Connect RCA cables from the CX23's "REAR OUTPUT" jacks to your rear channel ampwejścia lifier.
   • Wyjście pomocnicze: Connect RCA cables from the CX23's "SUB OUTPUT" jacks to your subwoofer ampwejścia lifier.
6. Zdalne sterowanie basem: Connect the wired remote bass control to the dedicated port on the CX23. Mount the remote in an accessible location for easy adjustment.

5. Instrukcja obsługi

The CX23 offers extensive control over your audio frequencies. Familiarize yourself with the controls shown in the diagram below.

Rysunek 3: Panel górny view of the Memphis Audio CX23, detailing all control knobs and switches for frequency, level, phase, and mode adjustments.

5.1 Sterowanie ogólne

• Dioda LED zasilania: Świeci się, gdy urządzenie jest włączone.
• Parallel Input Mode (Switch):
  • W: When selected, the front input signal is routed to all outputs (front, rear, sub). Useful if your head unit only has one pair of RCA outputs.
  • NA ZEWNĄTRZ: When selected, each input (front, rear, sub) is processed independently and routed to its respective output.

5.2 Subwoofer Crossover Controls

• Frequency (40Hz - 400Hz): Adjusts the low-pass filter cutoff frequency for the subwoofer output. Frequencies above this setting will be attenuated.
• Subwoofer ON/OFF (Switch): Enables or disables the subwoofer output.
• Bass Boost (25Hz - 250Hz, 0 - +12dB):
  • Częstotliwość: Selects the center frequency for the bass boost.
  • Poziom: Adjusts the amount of boost applied at the selected frequency.
• Phase (0° - 180°): Adjusts the phase of the subwoofer output relative to the main speakers. Use this to optimize bass integration and impact.
• Mode (ST/MO):
  • ST (Stereo): Processes left and right subwoofer signals independently.
  • MO (Mono): Sums left and right subwoofer signals to a mono output.
• Subwoofer Output Level (MIN - MAX): Adjusts the overall output level of the subwoofer channel. This can also be controlled by the wired remote.

5.3 Rear Crossover Controls

• High Pass Frequency (40Hz - 400Hz): Adjusts the high-pass filter cutoff frequency for the rear output. Frequencies below this setting will be attenuated.
• Slope (6dB/12dB): Selects the steepness of the high-pass filter. A 12dB slope provides a steeper cutoff than 6dB.
• Rear Output Level (MIN - MAX): Adjusts the overall output level of the rear channel.

5.4 Front Crossover Controls

• Frequency Multiplier (x1/x20):
  • x1: The frequency knob adjusts from 32Hz to 250Hz.
  • x20: The frequency knob adjusts from 640Hz to 5kHz. This allows for bandpass configurations when combined with the high-pass filter.
• High Pass Frequency (32Hz - 5kHz): Adjusts the high-pass filter cutoff frequency for the front output. The range depends on the Frequency Multiplier setting. Frequencies below this setting will be attenuated.
• Slope (6dB/12dB): Selects the steepness of the high-pass filter. A 12dB slope provides a steeper cutoff than 6dB.
• Front Output Level (MIN - MAX): Adjusts the overall output level of the front channel.

5.5 Wired Remote Level Control

The included wired remote allows for convenient adjustment of the subwoofer output level from the driver's seat. Turn the knob clockwise to increase subwoofer level and counter-clockwise to decrease it.

6. Konserwacja

The Memphis Audio CX23 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:

• Czyszczenie: Use a soft, dry cloth to wipe the unit. Do not use harsh chemicals, solvents, or abrasive cleaners.
• Znajomości: Okresowo sprawdzaj wszystkie połączenia przewodów, aby mieć pewność, że są solidne i nie są skorodowane.
• Wentylacja: Ensure that the mounting location remains clear of obstructions to allow for proper airflow and prevent overheating.

7. Rozwiązywanie Problemów

If you experience problems with your CX23, consult the following troubleshooting guide before contacting support.

8. Specyfikacje

9. Gwarancja i wsparcie

Memphis Audio products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Memphis Audio website. For technical support or service inquiries, please contact your authorized Memphis Audio dealer or Memphis Audio customer service directly.

Proszę zachować dowód zakupu na potrzeby roszczeń gwarancyjnych.