Instrukcja obsługi kabla adaptera LED Alphacool 18541 RGB 4-pin

1. Wprowadzenie

The Alphacool 18541 RGB 4-Pin LED Adapter Cable is designed to simplify the connection and synchronization of your RGB lighting setup with compatible mainboards. This 100cm long cable allows for easy integration with ASUS, Gigabyte, and MSI mainboards, as well as the Thermaltake TT Sync Controller and various manufacturer cases. It enables seamless control of your RGB lighting through your mainboard's software, enhancing your system's aesthetic.

2. Informacje dotyczące bezpieczeństwa

• Ensure your system is powered off and unplugged from the wall outlet before installing or removing any components.
• Handle the cable by its connectors, not by the wires, to prevent damage.
• Avoid bending the cable sharply or placing it under excessive tension.
• Keep the cable away from liquids and extreme temperatures.
• Jeśli nie jesteś pewien, który etap instalacji należy wykonać, skonsultuj się z wykwalifikowanym technikiem.

3. Zawartość opakowania

• 1x Alphacool 18541 RGB 4-Pin LED Adapter Cable (100cm)

4. Instrukcje konfiguracji

Follow these steps to properly connect your Alphacool 18541 RGB 4-Pin LED Adapter Cable:

1. Zidentyfikuj złącza: The cable features a male 4-pin connector on one end and a female 4-pin connector on the other. The male connector typically connects to your RGB lighting device, while the female connector connects to your mainboard's RGB header.





2. Connect to RGB Device: Plug the male 4-pin connector of the adapter cable into the corresponding female 4-pin RGB input on your lighting device (e.g., LED strip, fan, water block). Ensure the pins align correctly and the connection is secure.
3. Connect to Mainboard: Locate a compatible 4-pin RGB header on your mainboard. This cable is compatible with ASUS, Gigabyte, and MSI mainboards. Carefully plug the female 4-pin connector of the adapter cable into the mainboard's RGB header. Ensure the orientation is correct to avoid damage to the pins.



4. Zarządzanie kablami: Route the 100cm cable neatly within your PC case to avoid interference with other components and to maintain good airflow.
5. Włączanie: Once all connections are secure, power on your system.

5. Instrukcja obsługi

After successful installation, you can control your RGB lighting:

• Mainboard Software: Utilize your mainboard's dedicated RGB control software (e.g., ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync) to manage the lighting effects, colors, and synchronization.
• Thermaltake TT Sync Controller: If using a Thermaltake TT Sync Controller, refer to its specific instructions for integrating and controlling RGB lighting through the controller's software.
• RGB vs. ARGB: This cable is designed for 4-pin, 12V RGB headers, which control all LEDs on a strip or device to display the same color simultaneously. For individually addressable RGB (ARGB) lighting, which typically uses 3-pin, 5V headers, a different type of cable or converter is usually required. Ensure your lighting components and mainboard headers are compatible with the 4-pin RGB standard this cable provides.

6. Konserwacja

To ensure the longevity and proper function of your adapter cable:

• Keep the cable clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the cable to direct sunlight or high humidity.
• Do not pull on the cable to disconnect it; always grasp the connector firmly.
• Regularly inspect the connectors for any signs of damage or corrosion.

7. Rozwiązywanie Problemów

• Oświetlenie RGB nie działa:
  • Ensure all connections are secure and correctly oriented.
  • Verify that your mainboard's RGB header is enabled in the BIOS/UEFI settings.
  • Check your mainboard's RGB software for proper configuration and enabled lighting effects.
  • Test the RGB lighting component directly if possible, to rule out issues with the component itself.
• Incorrect Colors or Effects:
  • Confirm that the RGB header on your mainboard is a standard 4-pin 12V RGB header. This cable is designed for 4-pin RGB connections.
  • Update your mainboard's RGB control software to the latest version.
  • Reset RGB settings in your mainboard software to default and reconfigure.

8. Specyfikacje

9. Gwarancja i wsparcie

Alphacool products are manufactured to high quality standards. For information regarding warranty terms and conditions, please refer to the official Alphacool website or contact your point of purchase. For technical support or inquiries, please visit the Alphacool Store on Amazon or the official Alphacool support channels.