1. Wprowadzenie
The Turtle Beach Stealth 350VR gaming headset is engineered to deliver clear, amplified Virtual Reality audio. It features a battery-powered design, Variable Bass Boost, and an ergonomic structure specifically tailored for VR use, providing ample clearance for VR headbands and cables. Equipped with large 50mm speakers, it offers a rich and expansive audio experience. The lightweight build and comfortable fabric-wrapped memory foam ear cushions ensure extended comfort during use. A removable noise-cancelling microphone guarantees crystal-clear communication, complemented by Mic Monitoring, which allows users to hear their own voice to prevent shouting. Convenient on-board audio controls are easily accessible directly on the headset.
Rycina 1: Przód view of the Turtle Beach Stealth 350VR Headset.
2. Konfiguracja
2.1 Podłączenie mikrofonu
To connect the noise-cancelling microphone, firmly insert it into the dedicated jack located on the left ear cup of the headset. Ensure a solid connection for optimal chat clarity.
Figure 2: Close-up of the left ear cup showing the microphone jack.
2.2 Włączanie/wyłączanie
Locate the power switch on the left ear cup. Slide the switch upwards to power on the headset. A blue LED indicator will illuminate, confirming the headset is active. To power off, slide the switch downwards.
2.3 Ładowanie zestawu słuchawkowego
The Stealth 350VR features an internal rechargeable battery, providing up to 30 hours of amplified VR audio. To charge, connect the included USB charging cable to the charging port on the headset and a compatible USB power source.
2.4 Connecting to a VR Device (e.g., PlayStation VR)
Ensure your VR device (e.g., PSVR) is fully set up and powered on. Connect the Stealth 350VR to the VR device using the included short audio cable. The right-angle connector side of the audio cable should be connected to the VR device's inline port. After connecting, power on your Stealth 350VR headset. Adjust the VR device's volume to maximum, then use the headset's controls for your preferred volume level.
For PlayStation 4 setup: Go to Ustawienia > Urządzenia > Urządzenia audio. Zestaw Urządzenie wejściowe i wyjściowe to the headset connected to the controller. Set Wyjście na słuchawki Do Wszystkie audio. Zestaw Regulacja głośności (słuchawki) to maximum. Select Dostosuj poziom mikrofonu and follow on-screen instructions to calibrate.
Video 1: Detailed setup and feature overview for the Turtle Beach Stealth 350VR headset, including connection to VR devices.
3. Obsługa zestawu słuchawkowego
All primary audio controls are conveniently located on the left ear cup of the headset.
3.1 Mic Mute
To mute or unmute the microphone, slide the dedicated switch on the face of the left ear cup left or right.
3.2 Głośność główna
Adjust the master volume dial to control the overall audio output level of your Stealth 350VR headset.
3.3 Variable Bass Boost
Use the Variable Bass Boost slider to increase or decrease the bass levels, enhancing immersion in your VR experience.
Wideo 2: Szybkie przejścieview of the Turtle Beach Stealth 350VR headset features and controls.
4. Konserwacja
To ensure the longevity and optimal performance of your Turtle Beach Stealth 350VR headset, follow these maintenance guidelines:
- Czyszczenie: Use a soft, dry cloth to wipe down the ear cups and headband. Avoid using harsh chemicals or abrasive materials.
- Składowanie: Przechowuj zestaw słuchawkowy w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
- Pielęgnacja kabli: Handle all cables with care. Avoid sharp bends or excessive pulling, which can damage internal wiring.
- Mikrofon: When not in use, the detachable microphone can be removed and stored separately to prevent damage.
5. Rozwiązywanie Problemów
If you encounter issues with your Stealth 350VR headset, consider the following common solutions:
- Brak dźwięku/niska głośność:
- Sprawdź, czy zestaw słuchawkowy jest włączony i całkowicie naładowany.
- Sprawdź wszystkie połączenia kablowe, aby upewnić się, że są dobrze zamocowane.
- Verify that the master volume dial on the headset is turned up.
- Confirm that the audio output settings on your VR device or console are correctly configured (refer to Section 2.4 for PS4 settings).
- Mikrofon nie działa:
- Ensure the microphone is firmly inserted into its jack.
- Check that the mic mute switch on the headset is in the unmute position.
- Verify microphone input settings on your VR device or console.
- Zniekształcony dźwięk:
- Lower the master volume on the headset or your connected device.
- Adjust the Variable Bass Boost to see if it resolves the distortion.
- Upewnij się, że żadne inne urządzenia audio nie powodują zakłóceń.
6. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Głośniki | 50mm Speakers with Neodymium Magnets |
| Odpowiedź częstotliwościowa | 20Hz – 20kHz |
| Ear-cup Design | Over-Ear (Closed) |
| Microphone Design | Unidirectional Noise-Cancelling Gaming Microphone |
| Gniazdo słuchawkowe | 3.5 mm Jack |
| Technologia łączności | Przewodowy |
| Typ sterowania | Volume Control, Mic Mute, Bass Boost |
| Funkcja kabla | Detachable Audio Cables |
| Waga przedmiotu | 1.1 funta (ok. 0.5 kg) |
| Żywotność baterii | Do 30 godzin |
| Kompatybilne urządzenia | PlayStation VR, PlayStation 4, Oculus Rift, HTC Vive, Gear VR, PC, Xbox (via controller) |
7. Gwarancja i wsparcie
For warranty information, technical support, and additional resources, please visit the official Turtle Beach webOdwiedź witrynę lub skontaktuj się z działem obsługi klienta. Zachowaj dowód zakupu na wypadek reklamacji.
Wsparcie online: www.turtlebeach.com/support
