Wstęp
This manual provides essential instructions for the safe and effective use of your Logitech AC Power Adaptor. This adaptor is designed to provide power to various Logitech Harmony and MX series remote controls and accessories. Please read this manual thoroughly before use and retain it for future reference.
Image: Logitech AC Power Adaptor. This image shows the compact design of the power adaptor, featuring its main body and the attached power cord with a 2-pin connector at the end, ready for connection to compatible Logitech devices.
Informacje dotyczące bezpieczeństwa
- Use only with specified Logitech devices.
- Nie wystawiać na działanie wody i nadmiernej wilgoci.
- Do not disassemble or attempt to repair the adaptor.
- Upewnij się, że gniazdko elektryczne ma odpowiednią głośnośćtage matches the adaptor's specifications (240 Volts).
- Przechowywać w miejscu niedostępnym dla dzieci.
Organizować coś
- Zidentyfikuj zgodne urządzenie: Confirm your Logitech device (e.g., Harmony 720, 880, 890, 1000, MX 1000, MX Revolution, diNovo Media Laser, MX 5000, MX 3100, diNovo Edge, Harmony 890 Pro) requires this specific AC power adaptor.
- Połącz z urządzeniem: Insert the 2-pin connector of the AC power adaptor firmly into the power input port of your Logitech device or its charging cradle.
- Podłącz do gniazdka elektrycznego: Plug the AC power adaptor into a standard electrical wall outlet. Ensure the outlet provides 240 Volts as specified for the adaptor.
- Sprawdź połączenie: Once connected, your device should begin charging or power on, depending on its design. Refer to your device's specific manual for charging indicators.
Instrukcja obsługi
The Logitech AC Power Adaptor functions automatically once connected. It provides a stable power supply for charging or operating your compatible Logitech devices. No user interaction is required for its operation beyond proper connection.
- Always ensure the adaptor is securely plugged into both the device and the wall outlet.
- Disconnect the adaptor from the wall outlet when not in use for extended periods.
- Avoid pulling the cable to disconnect; always grasp the plug itself.
Konserwacja
- Czyszczenie: Disconnect the adaptor from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Składowanie: Store the adaptor in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adaptor body to prevent damage.
- Kontrola: Periodically inspect the cable and connector for any signs of damage, such as fraying, cuts, or bent pins. Discontinue use if damage is observed.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Device not charging/powering on. | Adapter nie jest prawidłowo podłączony. | Ensure the adaptor is firmly plugged into both the device and the wall outlet. |
| Gniazdko ścienne jest nieaktywne. | Test the wall outlet with another device or try a different outlet. | |
| Adaptor or cable is damaged. | Inspect the adaptor and cable for visible damage. Discontinue use if damaged and replace. | |
| Adaptor feels unusually hot. | Przeciążenie lub usterka wewnętrzna. | Immediately disconnect the adaptor from the power source and device. Do not use if it continues to overheat. |
Specyfikacje
- Marka: Logitech
- Zgodność modelu: Logitech Harmony 720, 880, 890, 1000 remotes; MX 1000, MX Revolution, diNovo Media Laser, MX 5000, MX 3100, diNovo Edge, Harmony 890 Pro.
- Wejście Voltage: 240 wolty
- Cotage: 45 watów
- Źródło zasilania: Elektryczny przewodowy
- Typ głównego złącza zasilania: 2 pinów
- Waga przedmiotu: 3.2 ounces (approximately 0.09 Kilograms)
- Wymiary opakowania: 6.6 x 4 x 2 cala
Gwarancja i wsparcie
For information regarding warranty coverage and technical support, please refer to the documentation included with your original Logitech device or visit the official Logitech support webWarunki gwarancji mogą się różnić w zależności od regionu i produktu.
Wsparcie Logitech: https://support.logi.com/