Wstęp
This instruction manual provides essential information for the proper setup, operation, and maintenance of your Yamaha WS-904A Heavy Duty Tom Stand with 3-Hole Receiver, 900 Series. This professional-grade double tom stand is engineered for reliability, durability, and versatility, utilizing Yamaha's renowned manufacturing processes. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
Informacje dotyczące bezpieczeństwa
- Always ensure all clamps and fasteners are securely tightened before use to prevent instruments from falling.
- Do not exceed the weight capacity of the stand. Overloading can cause instability and damage.
- Ustaw stojak na stabilnej i równej powierzchni, aby zapobiec jego przewróceniu.
- Keep hands and fingers clear of moving parts during adjustment to avoid pinching.
- Regularnie sprawdzaj stojak pod kątem śladów zużycia, uszkodzeń lub luźnych elementów. Nie używaj, jeśli jest uszkodzony.
Zawartość opakowania
Sprawdź, czy w opakowaniu znajdują się wszystkie komponenty:
- 1 x Yamaha WS-904A Heavy Duty Tom Stand (900 Series)
- 1 x 3-Hole Receiver
- Note: CLs (Tom Holders/Clamps) are not included and must be purchased separately.
Organizować coś
Follow these steps to set up your tom stand:
- Rozłóż nogi: Carefully unfold the double-braced legs of the stand until they are fully extended and stable. Ensure the stand is placed on a flat, level surface.
- Dostosuj wysokość: Odkręć pokrętło regulacji wysokościamp on the main shaft. Extend or retract the upper section to your desired height. This stand is designed to go lower than many other Yamaha double tom stands, making it ideal for hanging floor toms. Tighten the clamp securely once the desired height is achieved.
- Attach the 3-Hole Receiver: The 3-hole receiver is designed to accept compatible tom holders or cymbal arms (not included). Insert the receiver into the top tube of the stand and secure it with the provided clamp.
- Mount Toms/Cymbals: Insert your tom holders or cymbal arms into the holes of the receiver. Adjust their positions and angles as needed, then tighten their respective clamps to secure them firmly.
Image: The Yamaha WS-904A Heavy Duty Tom Stand with its double-braced legs and 3-hole receiver. This image shows the stand fully assembled and ready for tom holders.
Instrukcja obsługi
Once the stand is set up and your instruments are mounted, ensure all adjustments are secure. Periodically check the stability of the stand during use, especially if making dynamic movements or playing vigorously. The heavy-duty construction and double-braced legs provide excellent stability for multiple drums and cymbals.
- Adjusting Tom/Cymbal Position: Rozluźnij clamp on the 3-hole receiver or the individual tom/cymbal arm to reposition. Re-tighten firmly once adjusted.
- Sprawdzenie stabilności: Before each playing session, gently shake the stand to confirm all components are tight and the stand is stable.
Konserwacja
Proper maintenance will extend the life of your tom stand:
- Czyszczenie: Wipe down the stand with a soft, dry cloth after each use to remove dust and fingerprints. For stubborn grime, use a slightly damp cloth and dry thoroughly. Avoid abrasive cleaners.
- Smarowanie: Periodically apply a small amount of silicone-based lubricant to the moving parts, such as the height adjustment mechanism, to ensure smooth operation.
- Kontrola: Regularly check all screws, bolts, and clamps for tightness. Tighten any loose fasteners to prevent wobbling or component failure. Inspect rubber feet for wear.
- Składowanie: When not in use, collapse the stand and store it in a dry, temperate environment to prevent rust and damage.
Rozwiązywanie problemów
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Stojak jest chwiejny lub niestabilny. | Legs not fully extended; clamps not tightened; uneven surface. | Ensure legs are fully spread. Tighten all clamps. Move stand to a level surface. |
| Tom/cymbal holder slips. | Clamp not tight enough; excessive weight. | Ponownie dokręć zaciskamp firmly. Ensure the instrument's weight does not exceed the holder's capacity. |
| Trudności w regulacji wysokości. | Clamp too tight; dirt/grime in the shaft; lack of lubrication. | Rozluźnij clamp. Clean the shaft and apply a small amount of lubricant. |
Specyfikacje
- Model: WS-904A
- Szereg: Seria 900
- Typ: Heavy Duty Tom Stand with 3-Hole Receiver
- Typ bazy: Double-braced legs
- Waga przedmiotu: 11.15 funtów (5.06 kg)
- Wymiary produktu (dł. x szer. x wys.): 25.2 x 7.68 x 6.89 cala (64.0 x 19.5 x 17.5 cm)
- Wymagany montaż: No (Stand comes pre-assembled)
- Kod UPC: 086792892832
Gwarancja i wsparcie
Gwarancja: This Yamaha WS-904A Heavy Duty Tom Stand is covered by a 5-letnia gwarancja od daty zakupu. Niniejsza gwarancja obejmuje wady produkcyjne i materiałowe powstałe w wyniku normalnego użytkowania. Prosimy zachować dowód zakupu na wypadek roszczeń gwarancyjnych.
Wsparcie: For technical assistance, spare parts, or warranty service, please contact Yamaha customer support through their official website or authorized service centers. Refer to the official Yamaha webwitryna zawierająca najnowsze informacje kontaktowe i zasoby pomocy.
