Instrukcja obsługi filtra Tetra Whisper Power do akwariów o pojemności do 60 galonów

Wstęp

The Tetra Whisper Power Filter provides quiet, 3-stage filtration for maintaining clean water and healthy fish in your aquarium. This filter is suitable for aquariums up to 60 gallons and features a reliable design with no moving parts in the water.

Figure 1: Tetra Whisper Power Filter 60 product packaging.

Główne cechy

• Cichy i niezawodny: Engineered for quiet operation and long-term reliability.
• 3-Stage Filtracja: Provides mechanical, chemical, and biological filtration.
• Ultra-Activated Carbon: Effectively absorbs odors and discoloration from the water.
• Dual-Sided Mesh: Catches debris and fish waste in a dense, fibrous network.
• Bio-Foam: Creates a large three-dimensional area for beneficial aerobic bacteria, which eliminate toxic ammonia and nitrites.
• Technologia Stay Clean: Helps reduce buildup on aquarium glass and binds small dirt particles for easier filtration.
• Easy-to-Change Cartridges: Uses large-sized Tetra Whisper Bio-Bag Cartridges (sold separately).

Rysunek 2: Diagram ilustrujący 3-stage filtration process of the Tetra Whisper Power Filter.

Instrukcje konfiguracji

Follow these steps to properly set up your Tetra Whisper Power Filter:

1. Rozpakuj komponenty: Carefully remove all filter components from the packaging. Ensure you have the filter housing, intake tube, impeller, and a new Tetra Whisper Bio-Bag Cartridge (size large).
2. Montaż wirnika: Insert the impeller into its well within the filter housing. Ensure it is seated correctly.
3. Złóż rurę dolotową: Attach the intake tube to the filter housing. The intake tube has a socket for the impeller's upper bearing; ensure the impeller's upper bearing is properly supported by the intake tube. If the upper bearing fits loosely, a small piece of Teflon tape around the rubber bearing can create a snug fit.
4. Adjust Intake Tube Length: If your filter model has adjustable length intake tubes, select the appropriate length for your aquarium. Ensure there is at least 3 inches of space between the bottom of the intake tube and the gravel/substrate to prevent debris from jamming the impeller.
5. Montaż wkładu filtrującego: Place a new Tetra Whisper Bio-Bag Cartridge (size large) into the designated slot in the filter housing. Ensure the Bio-Foam is also correctly positioned for biological filtration.
6. Filtr pozycji: Hang the filter securely on the back of your aquarium. Ensure the filter is level and stable.
7. Zalej filtr: Before plugging in the filter, fill the filter housing with water from your aquarium. This primes the pump and prevents the impeller from spinning dry.
8. Podłącz zasilanie: Once the filter is primed and securely in place, plug it into a suitable power outlet. The filter should begin operating, drawing water from the aquarium and returning filtered water.

Figure 3: The Tetra Whisper Power Filter unit and its intake components.

Działanie

The Tetra Whisper Power Filter operates continuously to maintain water quality. Key operational aspects include:

• Filtracja ciągła: The filter is designed to run 24/7 to provide consistent mechanical, chemical, and biological filtration.
• Kontrola przepływu: Many larger Whisper filters include an adjustable flow control knob. This allows you to reduce the water flow, which can be beneficial during feeding times or for fish species that prefer less water movement, such as Bettas.
• Self-Priming (after initial setup): The design of the intake tube and housing helps the filter maintain its prime, allowing it to restart reliably after a power interruption without manual re-priming, provided the water level is adequate.

Figure 4: The Tetra Whisper Power Filter, ready for operation.

Konserwacja

Regularna konserwacja zapewnia optymalną wydajność i długowieczność filtra:

• Wymiana wkładu: Change Tetra Whisper Bio-Bag Cartridges monthly. These cartridges trap particles and contain Ultra-Activated carbon for chemical filtration.
• Czyszczenie wirnika: At least every six to twelve months, remove the impeller and clean its well with a small brush to remove any accumulated debris. This helps maintain quiet operation and efficient water flow.
• Intake Tube Cleaning: Periodically clean the intake tube to prevent blockages and ensure proper water flow into the filter.
• Poziom wody: Always ensure your aquarium water level is topped off. Low water levels can prevent the filter from restarting properly after a power interruption.

Rozwiązywanie problemów

If you encounter issues with your Tetra Whisper Power Filter, consider the following common solutions:

• Głośna praca:
  • Ensure the intake tube is fully and properly inserted into the main housing, supporting the impeller's upper bearing. An improperly seated tube can cause vibration and noise.
  • Check the impeller for debris or wear. Remove and clean the impeller and its well. Some users have noted that rough edges on the impeller's plastic components can cause noise; carefully trimming these edges may resolve the issue.
  • Verify that the filter is filled with water before plugging it in. Running dry can cause noise and damage.
• Zmniejszony przepływ wody:
  • Inspect the filter cartridge for clogging. Replace the Bio-Bag Cartridge if it appears dirty or restricted.
  • Inspect the intake tube for blockages from debris or substrate. Ensure there is adequate space between the intake and the aquarium bottom.
  • Clean the impeller and its housing for any obstructions.
• Filter Not Restarting After Power Interruption:
  • Ensure the aquarium water level is sufficiently high. The filter needs to be submerged to maintain its prime and restart.
  • Re-prime the filter by filling the housing with aquarium water before plugging it back in.
• Leaking from Filter:
  • Inspect the O-ring between the motor housing and the main filter body. If it is dry, shrunk, or damaged, it may cause leaks. Replacing the O-ring or carefully wrapping it with Teflon tape (if slightly shrunk) can resolve this.
  • Ensure all connections and components are securely fitted.

Specyfikacje

Gwarancja i wsparcie

The Tetra Whisper Power Filter comes with a 2-roczna ograniczona gwarancja. For warranty claims, technical assistance, or further product information, please refer to the contact details provided on the product packaging or visit the official Tetra webstrona.

Tetra has been a trusted brand in fishkeeping since 1951, providing comprehensive knowledge and solutions for aquarists.