JoyeAuto Wireless Apple CarPlay Android Auto Retrofit Decoder

1. Wprowadzenie

This JoyeAuto Wireless Apple CarPlay Android Auto Retrofit Decoder is designed to integrate advanced smartphone connectivity into your Porsche vehicle's original PCM3.0 factory screen. This module allows you to enjoy features like Apple CarPlay, Android Auto, Mirror-Linking, and more, without replacing your existing head unit. It is specifically compatible with Porsche PCM3.0 systems found in models such as Cayenne, Panamera, Macan, 911, Boxster, Turbo, 997, and 987 from 2009-2012.

Important: This module works on the original car factory screen; no screen replacement is needed. Please ensure your car has AUX activated or an AUX input before purchasing. If you are unsure about your car model's compatibility, please contact customer service with a photo of your car's main menu.

Image: JoyeAuto Wireless CarPlay module in a Porsche dashboard.

2. Specyfikacje

Note: The 'Display Size' refers to the internal processing capability, as this module integrates with your car's existing screen.

Image: JoyeAuto module dimensions.

3. Zawartość opakowania

Pakiet zazwyczaj zawiera następujące elementy:

• JoyeAuto Multimedia Video Interface Module
• Antena WiFi
• Kabel USB
• Przewód zasilający
• Mikrofon
• AUX Adapter
• Kabel LVDS
• Sub-PCB Board
• Wiązka przewodów 48PIN

Image: Accessories diagram.

4. Konfiguracja i instalacja

The JoyeAuto module is designed for non-damaging installation, integrating with your factory screen and head unit without requiring coding, thus preserving your car's warranty. Ensure your car's AUX input is active before proceeding.

4.1. Schemat połączeń

Refer to the wiring diagram below for proper connection of all components to the main module and your vehicle's PCM3.0 system.

Image: Wiring diagram for Porsche PCM3.0.

4.2. Module Port Identification

The main module features several ports for connection:

1. CP_USB: Connect with USB cable for wired CarPlay/Android Auto and USB media playback.
2. Wi-Fi: Connect with WiFi antenna for wireless connectivity.
3. LCD_OUT: Video output to the car's display.
4. Mic: Microphone input for voice control.
5. MOC: CarPlay box power input.

4.3. Ustawienia przełącznika DIP

Configure the DIP switches on the module according to your vehicle's setup and desired features:

Image: Module ports and DIP switch settings for configuration.

Image: Installation benefits including non-damaging installation, wireless connection, and factory equipment integration.

5. Instrukcja obsługi

The JoyeAuto module provides seamless integration with your car's existing controls and display, offering a range of smart features.

5.1. Funkcje podstawowe

• Bezprzewodowy Apple CarPlay: Enjoy seamless integration with your iPhone for navigation, music, calls, and more. Pairing is done via Bluetooth, with data transfer over 5.8GHz WiFi for stable connection.
• Bezprzewodowy Android Auto: Connect your Android phone for a safer driving experience. While wireless is supported, wired Android Auto is recommended for optimal performance due to variations in Android systems.
• Mirror-Linking (AirPlay): Wired mirroring for both Apple and Android phones. Use an original USB cable for lag-free display of your phone's screen on the car's display.
• Odtwarzanie z pamięci USB: Play downloaded video and music files directly from a USB flash drive connected to the JoyeAuto device's USB port.
• Sterowanie głosowe (Siri): Utilize Siri for navigation, phone calls, music playback, and other commands. Ensure the external microphone is properly installed for this feature.
• Rozmowy bez użycia rąk: Bezpieczne wykonywanie i odbieranie połączeń za pośrednictwem systemu audio samochodu.
• Nawigacja w czasie rzeczywistym: Access your preferred navigation apps directly on the car's screen.
• Obsługa kamery: Compatible with both original factory and aftermarket front/rear cameras (supports 170-degree view).

Image: Voice Control by "Hey Siri".

Image: Mirror-Linking feature.

Image: Factory Bluetooth integration.

Image: Aftermarket Camera and USB Flash Play features.

5.2. Interfejs sterowania

The module integrates with your car's existing controls:

• Ekran dotykowy: Interact directly with the CarPlay/Android Auto interface on your car's display.
• Sterowanie pokrętłem: Use the original rotary knob for navigation and selection within the system.
• "PHONE" Button: Press the car's "PHONE" button to activate Siri voice control.
• "NAVI" Button: Press the car's "NAVI" button to switch to the CarPlay/Android Auto system.
• Sterowanie na kierownicy: Use your car's steering wheel buttons for functions like next/previous song.

Image: Operation Introduction and control mapping.

6. Konserwacja

The JoyeAuto module is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:

• Utrzymuj moduł i połączenia w stanie wolnym od kurzu i wilgoci.
• Unikaj wystawiania modułu na działanie ekstremalnych temperatur.
• Upewnij się, że wszystkie kable są solidnie podłączone, aby zapobiec utracie sygnału lub sporadycznym problemom.
• Nie należy podejmować prób otwierania lub modyfikowania modułu, gdyż spowoduje to utratę gwarancji.

7. Rozwiązywanie Problemów

If you encounter any issues with your JoyeAuto module, consider the following common troubleshooting steps:

• Brak wyjścia audio: Ensure your car's AUX input is activated and selected as the audio source. The module relies on the car's AUX system for sound.
• Problemy z łącznością (bezprzewodowy CarPlay/Android Auto): Check that the WiFi antenna is securely connected to the module. For Android Auto, if wireless connection is unstable, try connecting via a wired USB cable.
• Display Not Showing CarPlay/Android Auto: Verify all video cables (e.g., LVDS cable) are correctly installed. Ensure the correct input source is selected on your car's PCM3.0 system, often by pressing the "NAVI" button.
• Sterowanie głosowe nie odpowiada: Confirm that the external microphone is properly connected to the module.
• Kamera tylna nie jest wyświetlana: Check the DIP switch settings (Switches 4 and 8) to ensure they are correctly configured for your type of camera (original or aftermarket) and that the camera is enabled.
• Ogólna awaria: Double-check all cable connections to the module and the car's head unit. A loose connection can cause various problems.

If problems persist after following these steps, please contact Joyeauto customer service for further assistance.

8. Wskazówki użytkownika

Based on common user experiences, here are some tips for getting the most out of your JoyeAuto module:

• Początkowe ustawienia: Take your time during installation, carefully following the wiring diagram and DIP switch settings. Incorrect settings are a common cause of initial issues.
• Jakość dźwięku: For the best audio experience, ensure your car's AUX input is of good quality and properly configured.
• Aktualizacje oprogramowania układowego: Periodically check with Joyeauto customer service for any available firmware updates, which can improve performance and add new features.
• Zarządzanie kablami: Neatly route and secure all cables during installation to prevent interference and ensure a clean look.

9. Gwarancja i wsparcie

9.1. Informacje o gwarancji

The JoyeAuto Wireless Apple CarPlay Android Auto Retrofit Decoder comes with a 365-dniowa gwarancja from the date of confirming receipt. This warranty covers quality problems related to non-human damages. If a quality issue arises that cannot be resolved after attempting all provided solutions, free repair or replacement will be offered. Return shipping costs for warranty claims are the responsibility of the buyer, while shipping costs for sending a new or repaired item will be covered by the seller.

This warranty does not cover damages caused by accident, misuse, or unauthorized modification of the product.

9.2. Wsparcie techniczne

Joyeauto provides 24/7 technical support in coherent English. For any questions, installation assistance, or troubleshooting that cannot be resolved using this manual, please contact our customer service team.

• WhatsApp: +86 178 2760 6612

Please be prepared to provide details about your car model and a description of the issue. If necessary, you may be advised to update your device's firmware after contacting support.

Image: Joyeauto Customer Service Contact Information.