PIXIE PC206DR Dual Relay Controller
Specifications
- Product: PIXIE Dual Relay Controller
- Model: #PC206DR-R-BTAM
- Input Voltage: 240v
- Frequency: 50Hz
- Maximum Loads (Resistive): 6a per channel (2 channels)
- Wireless Range: 15 meters typical indoors
- IP Rating: IP20
Designed for larger load switching in the PIXIE ecosystem, with 2 6Amp relays, which can be controlled independently. This provides for interesting electrical control scenarios with 3-wire sensors, AC ceiling fan speed control. Comes with 24hour/7 Day scheduling, Groups, Scenes and mobile app control and configuration.
Features
- Dual 6Amp relays for direct control of connected loads
- 3-wire motion sensor integration using 3rd party sensors
- AC Ceiling fan control – 3 speed + off – using the capacitor from the fans
- Memory switch is provided when the supply is terminated, and
- Resupplied, both outputs will be restored to the state before the outage.
- Optional bell press inputs for connection of 3rd-party bell-press/ momentary inputs for simple wall control operation and integration possibilities.
- Compatible with PIXIE Multifunction control, Multifunction remote control
- No minimum output requirements for switching loads
Electrical
Product Information
The PIXIE Dual Relay Controller is designed for larger load switching in the PIXIE ecosystem. It features 2 6Amp relays that can be controlled independently, allowing for various electrical control scenarios such as 3-wire sensor applications and AC ceiling fan speed control. The controller offers 24-hour/7-day scheduling, Groups, Scenes, and mobile app control and configuration.
Basic Operation
To operate the PIXIE Dual Relay Controller:
- 1 click toggle relay close/open
- 4 clicks manual pairing
- 9 clicks reset device
- Using ‘control buttons’ on the device and momentary inputs
Applications
Larger load switching control for residential dwellings for retrofit, renovation and new build; apartments; hotels and hospitality venues.
What’s in the Box
- 1 x Dual Relay Controller, installation instructions
Accessories
Bell Press mechs from a 3rd party for optional connection to bell-press inputs.
- Download the PIXIE and PIXIE PLUS Apps
- Depending on the building materials and construction.
- PIXIE Multifunction #SMFBTAS
- PIXIE Blind & Signal #PC206BS-R-BTAM
- PIXIE Translator #PC100T-R-BTAS
- PIXIE Gateway G3 #SGW3BT
Download the PIXIE and PIXIE PLUS Apps
PIXIE fits in
PIXIE fits into a huge range of Australian wall plates.
Wiring Diagram
Refer to the provided wiring diagram for installation guidance.
Copyright SAL – All Rights Reserved
Complete installation manual available at the AL National website.
FAQs
Q: Can the PIXIE Dual Relay Controller be used with wireless sensors?
A: Yes, the controller supports 3-wire sensors for various applications.
Q: What is the wireless range of the controller?
A: The typical wireless range indoors is 15 meters, but it may vary depending on building materials and construction.
Documents / Resources
 |
PIXIE PC206DR Dual Relay Controller [pdf] Owner's Manual PC206DR-R-BTAM, SMFBTAS, PC206BS-R-BTAM, PC100T-R-BTAS, SGW3BT, PC206DR Dual Relay Controller, Dual Relay Controller, Relay Controller, Controller |