Piocreat G40 Machine Parameters Installation Guide

Contents hide

1 Piocreat G40 Machine Parameters

2 Product Usage Instructions

3 High performance pressure wheel

4 OSAl Control System

5 Application field

6 Product specification

7 Frequently Asked Questions (FAQ)

8 Documents / Resources

8.1 References

9 Related Posts

Piocreat G40 Machine Parameters

Product Usage Instructions

Machine Setup and Preparation
Before starting the machine, ensure that the printing table is clean and free from any debris. Check that all components are properly connected and secured.
Powering On the Machine
Turn on the main circuit breaker switch located in the electric cabinet. Press the switch power button to activate the machine.

Loading Materials
Load the desired printing material into the feeder according to the specifications provided. Make sure the material is compatible with the machine.
Setting Parameters
Adjust the print mode and processing mode parameters as needed for your specific project. Ensure that the unit parameters are correctly configured.

Initiating Printing Process
Select the print trip coordinates and start the printing process. Monitor the machine during operation for any irregularities.

LARGE GANTRY ADDITION AND SUBTRACTION PROCESSING CENTER

Additive and subtractive manufacturing integrated machine
Screw 3D printing and CNC five-axis manufacturing integrated By 3D printing to print the work piece closed to the final size and contour, then the final size is achieved by milling, the processing speed is faster, the cost is lower, and the material is more efficient to use. The integrated manufacturing of adding and subtracting materials is an ideal solution for forming large sized work pieces.

Large working space

Workbench design
Can be divided into 6 independently controlled heating table According to the printed model, zone heating control can be selective, avoid effectively electricity wasting, and improves the stability of the bottom layer of the printing model.

High flow screw extrusion design
Equipped with 3-8mm large flow screw extrusion nozzle The maximum printing speed can reach 100kg/h. To ensuring the stability and accuracy of the gantry (0.02mm/1000mm), the printing speed is 10m/min and the processing speed is 15m/min.

High-speed and high-precision five-axis head
Equipped with 8.5KW/24000 high-speed hvct Using precision five-axis head, A axis ‡ 120 ° C, C’axis # 320 ° C, machinable with plastic, carbon fiber and non-ferrous metals.

High performance pressure wheel

Effectively improve the printing materials density Self-developed and researched high-performance pressure wheel, according to the control printing path, can effectively improve the density of the printing material and make stronger the bonding between the printing layers.

Wide range of printing materials
Can meet the application needs of different fields It is suitable for printing all kinds of thermoplastic particles, special mixtures materials, and ceramics and metal materials. Supports a variety of fiber composite thermoplastic polymer materials.

Full-automatic provide dry material
Automatic feeding + drying + dehumidification three in one The full-automatic three in one feeding system provides constantly dry materials, which can meet the continuous printing needs of 7 x 24 hours

OSAl Control System

32-inch full touch all-in-one machine Adopt OSAl control system and motion servo system, 32-inch full touch all-in-one machine, to ensure equipment stability and machine response speed.

Application field

Applied in various fields
Suitable for producing large to very large thermoplastic materials parts,molds, models and industrial tools, etc. Widely used in aerospace, automobile manufacturing, wind power, yacht and ship, home life, urban landscape and other composite materials field.