phrozen V2 UV Curing Lamp

Instructions

1. Power Supply & Light Switch
   • Turn on the device
     Connect the power cable. Press the Power button to turn on the device.
   • Turn off the device
     Long press the Power button. The curing lamp will turn off after a beep sound.
2. To Set Curing Time
   • Click the button S for preset modes
     This comes with three curing time settings: 5 min, 10 min, 20 min.
   • Click the button M for custom mode
     Click on the up and down keys to increase or decrease 1 minute each time. Long press the keys to quickly increase or decrease the minutes.
3. How to Operate the UV Curing Lamp
   Close the UV lamp cover. Click on the Power button. The curing lamp will begin operation.

Warning

• The UV lamp needs to be closed completely for the device to begin operation.
• Do not stare at the UV curing lights without closing the UV lamp as this may cause damage to your eyes.
• This appliance can be used by children aged 8 and above as well as by persons with reduced physical, sensory, or mental capabilities, if supervised or given instruction regarding the use of the appliance in a safe way, to ensure that the hazards involved are understood. Children are NOT allowed to play with the appliance.
• Children are NOT allowed to clean or provide device maintenance without adult supervision.
• The included power cord set packaged with the main unit cannot be used with electrical equipment other than the specified device.

Standard Maintenance Procedure
Please use sanitizing alcohol to clean the outside of your device. Do not use any oily or corrosive liquids to clean the device

Please follow Phrozen’s social media accounts and subscribe to our YouTube channel to learn more about printing tips and share ideas with one another. Feel free to contact us if you have any questions.

Documents / Resources

phrozen V2 UV Curing Lamp [pdf] User Guide V2 UV Curing Lamp, V2, UV Curing Lamp, Curing Lamp, Lamp

References

• User Manual