phrozen Sonic XL 4K Plus Bundle
Dear User,
Thank you for joining us. Please read the CURE+ manual thoroughly and follow the instructions step by step to ensure the best user experience
Key Notes
Operating Environment
Place the CURE+ on a flat, dry, and well- ventilated surface. Avoid direct sunlight, high temperatures, or environments with frequent vibrations.
Ensure a 5 cm clearance at the back of the machine for effective heat dissipation from the rear fan.
Cleaning Instructions
It is recommended to use 95% alcohol and a paper towel to carefully wipe the machine and the glass.
Safety Notes
Wear personal protective equipment ( gloves, masks, goggles, and long-sleeved clothing ) during the curing process. Avoid touching the internal components of the machine when removing objects to prevent burns.
Introduction
Product parts
Accessories
Specifications
System Specifications
Hardware Specifications
- All specfrations were tested in a laboratory and are subject to change without prior notice. For the latest update, please refer to Phrozen’s official website.
- The included power cord set packaged with the main unit cannot be used with electrical equipment other than the specified device.
- Mains Supply Voltage Fluctuations : ±10%
- Overvoltage Category : OVC 11
- Pollution Degree: PD2
Get Started
Curing
Cure with Brand Resins Mode
- Select the “Brand Resins
” mode. - Choose the resin brand.
- Once selected the resin, tap “Start” in the bottom-right corner to begin curing with the preset profile for frat resin.
Cure with Modules Mode
- Select “Modules”.
- Choose a saved curing profile for your custom curing needs.
Tap “Start” in fre bottom-right corner to begin.
Add Profiles in Modules
- Select “Modules”.
- Tap the “Edit” button t, in the top-right corner.
- Tap “Add” to create a new curing profile.
- Name the profile.
- Adjust the curing parameters as follows:
- UV (light intensity)
Adjust the UV light intensity from LEVEL 1 (20%) to LEVEL 5 (100%). - Flashing
Enable this function to prevent uneven curing. You can set the flashing frequency from Level N (highest) to Level 4 (lowest), or disable the function for continuous light Heating
When enabled, the machine will heat up to 60 / 140 OF before starting the curing process.
‘Waiting time for heating may differ depending on the ambient temperature.
Once the settings are complete, click “Next”.
- UV (light intensity)
- Setthe curing time ard click “Save”, the curing profile will be saved in modules.
Delete Profiles in Modules
- Select “Modu lesn.
- Tap the “Edit” button in the top-right corner.
- Select “Delete” below.
- Select the file and choose “Delete Item” to delete it:
Cure with Manual Mode
- Select “Manual Mode”.
- You can manually adjust the curing parameters here. Afterward, follow the same steps as “Add Profiles indules”. ]
- After curing, you can choose whether to save the settings as a new profile or di scard them.
Settings
Update Curing Profile and Firmware
Please go to Firmware Download Page to download the latest firmware and Curing profile and view the complete update tutorial. 
After-Sales Service & Warranty
- Phrozen offers a one-year warranty for CURE+.
- If you have any questions while using CURE+, please scan the QR code to visit the Phrozen Help Center, where you can find helpful product guides or get in touch with our support team.
Congratulations!
- You have just completed your first run.
- We hope you’ve had a great experience!
- Please follow Phrozen’s social media accounts to learn more about printing tips and share information with the community.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radi0/TV technician for help.
Frequently Asked Questions
Can this resin be used for other dental applications?
This resin is specifically designed for creating gingiva masks on dental study models and may not be suitable for other applications.
What is the shelf life of this resin?
The shelf life can vary, but it is recommended to use the resin within a specific timeframe mentioned on the packaging for best results.
Is this resin water-washable?
Yes, this resin is water-washable, making it convenient for cleaning and handling during the modeling process.
Documents / Resources
 |
phrozen Sonic XL 4K Plus Bundle [pdf] User Manual Sonic XL 4K Plus Bundle, 4K Plus Bundle, Plus Bundle |