PhotoNova A24S-YY WIFI Solar Camera User Guide

The iCam365 WIFI Solar Camera A24S-YY comes with a camera, solar
panel, user manual, support frame, screws, and various features
including a photosensitive sensor, PIR motion sensor, LED light,
power switch, indicator light, charger interface, MIC, reset
button, and SD card slot.

Installation Instructions:

Camera Installation:

Select height and position the camera at 7-10 feet above the
ground for optimal motion sensor range. Avoid direct sunlight
exposure. Align the holes on the bracket with the clips above the
camera and press downward to secure them into the slot.

Solar Panel Installation:

When installing in the northern hemisphere, face the panel
south; in the southern hemisphere, face it north. Ensure no
obstructions block sunlight. Install to maximize solar
exposure.

Product Usage Instructions:

Downloading and Login:

Download the iCam 365 App from the App Store or Google Play.
Insert a micro SD card correctly. Use the reset button for factory
settings if needed.

Adding Device:

Power up the device. Click ‘Add’ in the app, scan the QR code on
the camera, select Wi-Fi, enter password. Follow on-screen
instructions.

Viewing Live and Recorded Video:

Select device and event type. Show QR code to camera lens, wait
for network distribution. Troubleshoot if needed.

FAQ:

Q: What should I do if my device fails to connect?

A: If adding fails, ensure the device is powered on, Wi-Fi is
accessible, and correct password is entered. Contact customer
service if issues persist.

“`

View Fullscreen

iCam365
Quick Start Guide
WIFI Solar Camera
A24S-YY

Packing List

Camera

Solar panel

User manual

support frame

01 Screws

Prouct overview

photosen sor
PIR Motion Sensor

Antenna LED light

Photosensitive Sensor Lens

LED light

Power switch

IInnddiiccaattoorr lLigighhtrt Photosensitive Sensor Lens

hor n

Charger interface

MIC Align the holes on the bracket with the clips above the camera, then press downward to secure them into the slot

Reset button SD card slot

Slot

Installation of the camera

Select height and position
Hang the camera at a height of 7-10 feet (2-3 meters) above the ground. This height maximizes the range of the camera’s motion sensor. Avoid placing the camera. Avoid placing the camera in direct sunlight.

Camera field of view

Motion

2-3ft

Detection zone

Installation instruction of solar panel
1. Keep the installation angle of solar panels about 30-45° with the horizontal plane, as shown in the picture below. 2. The installation between the solar panel and the camera is shown in the following figure.

Tips for the installation of solar panel

Tips for installing solar panels
1. When installing in the northern hemisphere, face the panel to the south, and when installing in the southern hemisphere, face the panel to thenorth. 2. Take care to install the solar panel so that the sun is not blocked by ny items such as eaves, trees branches, etc.

Download and Login

Download the App before establishing a connection with the device.

Scan the code to download
Scan QR code to download iCam 365 “App

App market download
Search for “icam365” in the Apple Store or Google Play and download it!

NOTE: Insert the Micro SD card in the direction shown. If inserted incorrectly, the Micro SD card may jam and the device may be damaged. SD Card Interface: Supports micro SD cards for local storage (up to 128GB). Reset Button: Used to restore the camera to factory settings (press and hold for 5-8s). Card Capacity Requirements: 8-128GB. Read and write speed requirements: Class10 level. File format: FAT32 FAT32.

App will be continuously updated, UI is based on the app

Scan the QR code to download “icam365 ”

Add Device

When adding a device, check that the device is powered up

Step 1 Click the Add button

Step 2 Scan the QR code on the machine

Step 3 Select the Wi-Fi to connect to and enter the password

App Functionality Description / Home
Each device has a different function, for reference only
warning message

App Functionality Description / Live

Each device has a different function, for reference only

More functions

App Functionality Description / Videorecord

Each device has a different function, for reference only

App Functionality Description / Warning message

Select device

Select event type Select event date

Step4
Show the QR code to the device lens, When you hear the beep, click next

Step5 Wait for the distribution network and the addition to complete
If adding fails, try 1. Reconnect the power supply of the device once to ensure that it is powered on; 2. Check whether the Wi-Fi connected to the device can access the Internet normally 3. Check if the Wi-Fi password is entered correctly
After trying the above methods, it still fails, it is recommended to contact the online customer service for help

View live and recorded video
Settings Share the device

More resources

Clarity Capture the currently
selected screen Record the current screen
Sound Switch
Switch to Cloud Recording

Scaffolding Full screen Switch to card Recording intercom

The application will be updated continuously, the interface is based on the app

Slide to select time

Recording date Event
Click to quickly locate
The application will be updated continuously, the interface is based on the app

View event details The application will be updated continuously, the interface is based on the app

Product specifications and descriptions

Indicator light status
Mode Work mode Sleep mode Charging mode Fll charged mode
Product specification
Item Camera lens Image reslution Storage mdia Rotation Angle Battery capacity Adapter requirement

Status Blue Red Red Off
Specification Field of view:90° Max. 1920×1080 Micro SD card (Up to 128GB) 355° pan, 90° tilt 8000mAh 5V/1.5A

Common problem

If the following methods still don’t solve your problem, please contact the customer service of the camera you purchased, or contact the online customer service in the App, and we will solve it for you as soon as possible

Problems What should I do if the device is sun successfully added?

Solution check whether the Wi-Fi password is correct, and the network can be connected correctly, then RESET the camera, and add it again after completion.

How to download video?

Click the “Record Screen” button during playback, and click the red button after recording, and the video file will be saved to the phone;

What if the display device is offline?

First confirm whether the power supply and network are normal, and there is no problem before powering off the camera and restarting it. If the connection is still disconnected after restarting, please remove the camera from the APP and add it again.

The memory card is full, what should I do?

No manual processing is required. When the remaining memory card capacity is less than or equal to 500M, the camera will automatically overwrite the oldest video file.

What should I do if I cannot receive the warning
How to share the device with others?

1. Confirm that the message in the App device settings is on 2. Apple mobile phone: In the mobile phone settings, find the “IACM365” application and enable the “message notification” permission. Log out of “IACM365” and log in again. Android phone: In the message notification, find “IACM365” and enable the “Allow Notification” permission. Alarm messages are stored for up to 7 days
Click share and send the link to the sharer. The sharer can complete the operation step by step according to the content of the connection. Share up to 10 people per device

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Documents / Resources

PhotoNova A24S-YY WIFI Solar Camera [pdf] User Guide
A24S-YY, A24S-YY WIFI Solar Camera, WIFI Solar Camera, Solar Camera, Camera

References

User Manual