D32 Smart Mini Label Maker
“
Product Specifications:
- Languages: English, Japanese, German
- Label Maker Display: Print head, Charging port, Paper
compartment cover, Paper exit, Power button, Indicator light - Label Paper Display: Various labels available for purchase,
Pre-cut paper display, Continuous paper display - Product: Pattern label
- Quantity: 3
Product Usage Instructions:
1. Parts Description:
Identify the different parts of the label maker including the
display, print head, charging port, paper compartment cover, paper
exit, power button, and indicator light.
Understand the functions of the power button and indicator light
for powering on/off, calibrating label position, and checking
device status.
3. Closing the Cover:
Ensure to close the cover properly after aligning it in the open
position to maintain device integrity.
4. Boot Guide:
- Turn on the power.
- Click the power button to identify the label position.
- Complete paper positioning by allowing a piece of paper to come
out.
5. Confirm the Label Size:
Check the label paper packaging or pads for the actual size used
or refer to the shipment details for replacements.
6. Downloading the App:
Visit downloadapp.qu-in.top/Ph or scan the provided QR code to
access the Detailed Online Guide, video tutorials, and FAQs.
7. Printer Connection:
- Turn on GPS (Android mobile phone only).
- Open the designated app for printer connection.
8. Guidelines for Use:
- Open the paper compartment cover.
- Take out the label paper and remove any anti-loosening
stickers.
FAQ:
Q: What do the different indicator light statuses mean?
Status:
- Solid Green Light: Device functioning properly
and fully charged - Fast Flashing Green Light: Charging when
printer is off - Slow Flashing Green Light: Charging when
printer is on - Solid Red Light: Out of paper or printer
overheating – insert label paper properly or let the printer cool
down - Slow Flashing Red Light: Low battery – charge
for at least 20 min up to 1 hour - Fast Flashing Red Light: Battery running low –
charge for 2-3 hours
“`
D32 Instruction
Contains three languages: English, Japanese, German
03.Parts Description Appearance Introduction 01 Label Maker display
EN Please read the instructional manual carefully before using the product. JP DE Lesen Sie sich diese Bedienungsanleitung vor dem Gebrauch sorgfältig durch.
Print head Charing port
Paper compartment cover
Paper exit
Paper cabin Power button
Indicator light
02 Label paper display Various labels available for purchase
Pre-cut paper display
Continuous paper display
03.Parts Description Power Button and Indicator Light
05 Closing the cover after alignment the cover open position.
05. Boot Guide
01 After turning on the power, click the power button to identify the label position.
02 Come out a piece of paper positioning completed.
08.Confirm the Label Size
Method I: Check the label paper packaging. Please refer to the actual size used.
Method II: Check the label paper pads. The old and new versions of label paper are being replaced, please refer to the actual shipment.
Product : Pattern label
MDSoepdteaecill:::1DP2oP*l4-a0rPmb06emar/,
Seal, Snow 210 pcs
fox
Quantity : 3
1
Please do not tear 2mm*40mm 3/8″*1 1
/2″
09. Detailed Online Guide Method 1: Visit downloadapp.qu-in.top/Ph to access the Detailed Online Guide, video tutorials, and answers to FAQs.
downloadapp.qu-in.top/Ph
EN Multilingual Comprehensive Instruction Manual JP DE Detaillierte Bedienungsanleitung in verschiedenen Sprachen
Indicator light
01 Button Instructions
Button Type Power Button
Operation Long press for 3s Press once when printer is on Double press when printer is on
Function Power on/off Calibrate label position Print a self-test page
NOTE
· When installing or replacing the label roll for the first time, the label position identification is required.Step 01 · If the label position identification is not carried out Step 01 , failures may occur such as first printing missing, not centered, etc.
06.Downloading the App
Method 1: Search for the “Print Master” app on App Store® or Google PlayTM for download and installation.
English
01.Packing List
Printer*1
Product instruction*1
Charging line*1
NOTE
· The number of paper rolls in the list is subject to the actual shipment.
02.Product Specifications
02 Indicator LightInstructions
Status
Meaning
Advised Action
Solid Green Light
Device functioning properly and fully charged
/
Fast Flashing Green Light
Charging when printer is off /
Slow Flashing Green Light
Charging when printer is on /
Solid Red Light
Out of paper Printer overheat
Properly insert label paper into Paper Outlet
Pause printing for 5 min for printer to cool down
Slow Flashing Red Light
Low battery
Charge for 1 hour (or at least 20 min if in urgent need)
Fast Flashing Red Light
Battery running low
Charge for 2-3 hours
Print Master
Method 2: Scan the QR code to download the app.
As the Safari browser on Apple devices does not support direct QR code scanning, please use your device’s built-in QR code scanner instead.
Print Master
07.Printer Connection
01 Turn on GPS.(Android mobile phone only.)
02 Open the App.
04. Guidelines for Use
01 Open the paper compartment cover of the machine.
02 Take out the label paper, tear off the anti-loosening sticker.
Privacy
Location Services On >
Method 2: Scan the QR code to access the Detailed Online Guide, video tutorials, and answers to FAQs.
As the Safari browser on Apple devices does not support QR code scanning, please use your device’s built-in QR code scanner instead.
10. FCC WARNING
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
Product name
Smart Mini Label Maker
Product model
D32
Printing technology
Thermal printing
Consumable width
12-15mm
Effective printing width 12 mm
Supported consumables Pre-cut paperblack mark paper continuous paper
Printing density
Lightstandarddark
Printing resolution
203 dpi
Print head service life 50 KM
Communication interface Bluetooth
Product size
82*82*32.5 mm3.23*3.23*1.28 inch
Power input
5V 2A
Power supply method Lithium Battery
Supported operating system
Android/iOS
03 Depending on the direction of the marking, place the label paper into the paper compartment.
04 Pull out the label paper out of the Paper exit by 5 mm in length for normal printing.
Pull out 5mm
03 Click to search for the device.
Please make sure your label maker and
Bluetooth are turned on
Connect now
04 Connect immediately.
NOTE
· This product needs to be connected to the printer in the App after the Bluetooth is turned on. · According to the official requirements of Google, Android mobile phones need to open the GPS permission before they can use the Bluetooth function. · When connecting the App, please make sure that the printer is turned on and the Bluetooth of the mobile phone is turned on.
11. ISED NOTICE(Canada)
IC Warning This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC RF Exposure Statement/ IC Déclaration d’exposition aux RF: The device has been evaluated to meet general IC RF exposure requirement. The device can be used in portable exposure condition without restriction. L’appareil a été évalué pour répondre aux exigences générales d’exposition aux RF d’IC. L’appareil peut être utilisé dans des conditions d’exposition portable sans restriction.
Documents / Resources
 |
Phomemo D32 Smart Mini Label Maker [pdf] Instructions D32 Smart Mini Label Maker, D32, Smart Mini Label Maker, Mini Label Maker, Label Maker, Maker |
