Phomemo D30 Label Maker User Manual

Phomemo D30 Label Maker

Specifications

• Product Name: Label Maker HVIN/DVIN
• Charging Port: Type-C
• Power Input: DC 5V (Power adapter not included)
• Connectivity: Bluetooth (via Print Master app)
• Indicator Light: Green (for power on/charging status)
• Battery: Internal rechargeable battery

Product Introduction

Packing List

Printer Parts Instruction

Getting Started

Downloading the App

Method 1: Search for the “Print Master” app on App Store’ or Google Play for download and installation.

Method 2: Scan the QR code to download the app. You can scan the code using your cell phone’s camera, the built-in QR code scanning feature of your browser, or a dedicated QR code scanning app
As the Safari browser on Apple devices does not support direct QR code scanning, please use your device’s built-in QR code scanner instead.

User Guide

1. Remove the protective film.
2. To turn on the printer, long press the Power Button for 3 seconds until the Indicator Light turns green.
3. Open the app and follow the instructions to print a la bel.
4. After printing, tear off the label along the Paper Exit.
5. Remove the liner.
6. Attach the label to a dry, flat surface.

Replacing the Paper Roll

1. To turn on the printer, long press the Power Button for 3 seconds until the Indicator Light turns green.
2. Open the Top Cover
3. Remove the paper roll to be replaced.
4. Take out the unused paper roll.
5. Remove the Protective Tab from the new paper roll.
6. As shown in the picture, place the pa per roll into the Paper Compartment, ensuring the highlighted label faces left.
7. Pull the label out of the Paper Exit.
8. Close the Top Cover.
9. Click the power button. If a complete blank label is printed, the positioning is successful.
10. Open “Printer Master” App and connect the printer.
11. Click [New Label] in the Home.
12. Enter the editing page.

Charging Instructions

1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2.  Insert the Type-C end (flat end) of the USB cable into D30’s Type-C Port; insert the Type-A end (wide end) of the USB cable into the Type-A port of the power adapter.
3. Upon connecting the printer to an outlet using the power adapter, please check the status of the Indicator Light. A slow flashing green light when the printer is off or a fast flashing green light when the printer is on indicates that the printer is successfully charging.
4. When the battery is depleted, charge for 20 minutes for quick usage. For a full charge, please charge for 2-3 hours or until the Indicator Light turns solid green.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen. Once the battery is fully charged, please unplug the charger promptly.

• Do not charge near flammable materials. Charge in a cool, well-ventilated environment and avoid high temperatures or enclosed spaces.
• Avoid using the printer while charging, as this may lead to reduced charging speed, compromised print quality, and shortened battery life.

Accessing Detailed Online Guide

You can find more guides, video tutorials, and answers to FAQs through any of the following methods:

Method 1: Visit D30.phomemo.com

Method 2: Scan the QR code.
You can scan the code using your cell phone’s camera, the built-in QR code scanning feature of your browser, or a dedicated QR code scanning app.

As the Safari browser on Apple devices does not support direct QR code scanning, please use your device’s built-in QR code scanner instead.

Information to User

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment In a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Warning statement

CAN ICES (A) / NMB (A)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISED RF exposure statement:
The device has been evaluated to meet general ISED RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Battery Safety Tips

1. Disposal of a battery into fire or a hot oven, or mechanical Ily crushing or cutting of a battery, that can result in an explosion.
2. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas
3. The battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
4. Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
5. Battery cannot be subjected to extremely high or low temperatures, low air pressure at high altitude during use, storage or transportation.

Warranty Card

Special Notes
The company assumes full responsibility for the revision and explanation of this manual, exercising utmost diligence to guarantee its accuracy. Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, the actual product may vary slightly from the images. Please refer to the physical product for accurate representations.