PHIPOL-logo

PHIPOL DCWZC4-24TC RGBW Remote Control Unit

PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-product

Product Usage Instructions

  1. Install Battery: Remove the remote control battery cover, install 2 AAA batteries, and cover the battery cover.
  2. Remote Control Operation: Operate brightness, mode, and other functions after successful pairing.
Scope of Application
The product is widely used in eaves, villa exterior wall, courtyard, roof, pavilion, tent, woods, and other landscape lighting functions.

Product function

  • RGBW four-in-one high quality lamp
  • beads, 16 million color S14G ball
  • bubble built-in light guide column, light emitting uniform and soft auxiliary lighting and RGBIC magic color atmosphere lighting double in one
  • Support keys
  • Equipped with antibacterial 433 remote control, remote control operation supports timing, countdown, 20 scenarios of sharing and memory functions, color, brightness, optional
  • The end and end are connected with terminals, variable shape and 360 degree rotary hook design, convenient suspension and installation. Waterproof interface, glue filling packaging, IP65 waterproof is suitable for indoor and outdoor use
PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (1)
product size
PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (2)
  1. Enter the DC3V
  2. LED output
  3. Function button: boot-mode switch-shutdown long press more than 5 seconds to reset,

Product connection

Remote control instructions
PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (3)
1 ON Open
2 OFF Close
3 PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (4) Luminance +
4 PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (5) Luminance-
5 PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (6) Velocity +
6 PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (7) Velocity-
 

 

7

 

 

Static Color

 

Red green blue yellow

PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (8)

8 Multi 8Fix the color
9 Random 8Species colors vary randomly
 

10

 

Strobe

 

Mode and background color swit- ching

 

11

 

Breath

 

8The species color breath change switch

 

12

 

Flash

 

8The color rhythm change switch

PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (9) PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (10)
  1. Install battery: Remove the rem-ote control battery cover, inst-all 2 AAA batteries, and cover the battery cover.
  2. Remote control operation: ope-rate brightness, mode and other functions after successful pairing
Scope of application: products are widely used in eaves, villa exterior wall, courtyard, roof, pavilion, tent, woods and other landscape lighting function
PHIPOL-DCWZC4-24TC-RGBW-Remote-Control-Unit-fig- (11)

Specification parameters

Model DCWZC4-24TC
Light body specif- ications (1String) 15 meters and 15 lights (2String) 30 meters and 30 lights (3String) 45 meters and 45 lights
Ball bubble model S14 bulb, E26 spiral lamp head
Surface process Standard Black (white)
Remote control

distance

≦20M
Protocol 433
Working voltage 3V
Product power 12W 18W 27W
Power adapter 12V/12W 12V/18W 12V/36W
LED lamp bead 5050 The RGBW is four-in-one
Colour temperature 3000K
Show the finger ≥85
Light quantity 140 lm 280 lm 420lm
 
Classification of

waterproof

IP65
Set list
name  

(1String) 15 meters and 15 lights

 

(2String) 15 meters and 30 lights

 

(3String) 15 meters and 45 lights

Power adapter 12V12W*1 12V18W*1 12V36W*1
 

433telecontroller

1 1 1
ribbon 15 30 45
gum 1 1 1
instructions 1 1 1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
  • Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FAQs

Q: Can the product be used outdoors?
A: Yes, the product is suitable for indoor and outdoor use with its IP65 waterproof rating.

Q: How do I reset the product?
A: Long press the shutdown button for more than 5 seconds to reset the device.
Q: What is the remote control distance?
A: The remote control works within a distance of 20 meters.

Documents / Resources

PHIPOL DCWZC4-24TC RGBW Remote Control Unit [pdf] User Manual
GBFDC0011A, DCWZC4-24TC RGBW Remote Control Unit, DCWZC4-24TC, RGBW Remote Control Unit, Remote Control Unit, Control Unit, Unit

References

Leave a comment

Your email address will not be published. Required fields are marked *