PHILIPS SNF60 Replacement Filter
Overview
This replacement filter is designed for the Philips car air purifier series SNF60, SNF100, and SNF130, helping maintain optimal purification performance for healthier in-vehicle air quality.
Specifications
| Specification | Details |
|---|---|
| Product Type | Replacement Air Purifier Filter |
| Model | SNF60 |
| Compatible Series | Philips Series 800 Air Purifiers |
| Filter Type | Multi-layer NanoProtect Replacement Filter |
| Filter Material | Pleated filter media with integrated filtration layers |
| Shape | Cylindrical |
| Installation Type | Direct replacement filter cartridge |
| Application | Indoor air purification |
| Replacement Interval | Approximately up to 12 months depending on usage and air quality |
| Color | White filter body with gray end caps |
| Maintenance Type | Replace when filter performance decreases or indicator shows replacement required |
Quick Installation Guide
- Turn off the air purifier and disconnect it from the power source.
- Open the filter compartment cover on the device.
- Carefully remove the old filter to avoid releasing trapped pollutants.
- Clean dust or debris from the filter housing using a dry cloth.
- Insert the new filter, ensuring it is properly seated and the seal is secure.
- Replace the cover and reconnect the device to the power source.
- If necessary, reset the filter life indicator (refer to your specific model’s user manual).
IMPORTANT:
Do not wash the filter with water or any cleaning agent. Doing so will destroy the filter media and render it ineffective.
Maintenance and Disposal
To maintain peak performance, we recommend replacing the filter every 3 to 6 months, depending on usage intensity and environmental conditions. Please dispose of the used filter according to your local EU waste management and recycling regulations.
Compliance Information
This product is manufactured to meet EU standards for materials, safety, and performance. Keep out of reach of children and pets when not installed in the device
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced airflow from air purifier | Filter is clogged with dust or particles | Replace the filter with a new PHILIPS SNF60 Replacement Filter |
| Air quality does not improve | Filter installed incorrectly or filter is worn out | Check filter installation and replace if the filter has reached the end of its service life |
| Unusual odor from purifier | Old or contaminated filter | Replace the filter and clean the air purifier housing |
| Filter replacement indicator remains active | Filter reset procedure not completed | Reset the filter indicator according to the air purifier instructions |
| Filter does not fit properly | Incorrect filter model selected | Confirm compatibility and use the correct SNF60 replacement filter |
Documents / Resources
 | SNF60 Replacement Filter |
References
- User Manualmanual.tools