PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps logo

PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps product

PERFORMANCE RANGE

  • Flow rate up to 120 l/min (7.2 m³/h)
  • Head up to 52 m
  • Restart pressure: 1.5 bar

APPLICATION LIMITS

  • 5 m maximum immersion depth
  • Maximum height between pump and point of use 10 m
  • Maximum liquid temperature +40 °C
  • Suction down to 35 mm above ground level
  • Continuous service S1

CONSTRUCTION AND SAFETY STANDARDS

Complete with:

  • 10 m long power cable
  • internal electronic device for pump starting (when tap opened) and stopping (when tap closed)
  • threaded connector 1¼” (delivery)
  • hose connector Ø 35 mm

EN 60335-1
IEC 60335-1
CEI 61-150
EN 60034-1
IEC 60034-1
CEI 2-3

CERTIFICATIONS
Company with management system certified DNV ISO 9001: QUALITYPEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 1

INSTALLATION AND USE

TOP-MULTI-TECH pumps are recommended for pumping clean water and liquids that are not chemically aggressive for the materials from which the pump is made.
Because of their high efficiency and reliability they are suitable for use in applications such as domestic water supply from reservoirs, tanks or relatively deep wells, for drawing rain water from cisterns to water gardens or for use in irrigation systems, etc.
An internal electronic device starts or stops the pump automatically when the tap is opened or closed.

PATENTS – TRADE MARKS – MODELS

  • Patent n. EP2990653
  • TOP MULTI® Registered Trade Mark n. 0001334477

OPTIONS AVAILABLE ON REQUEST

  • Other voltages or 60 Hz frequency

CHARACTERISTIC CURVES AND PERFORMANCE DATA

50 Hz n= 2900 min -1PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 2

TOP MULTI-TECH 2 – 4

MODEL

Single-phase

POWER (P2) Q m³/h 0 0.6 1.2 1.8 2.4 3 3.6 4.2 4.5 4.8
kW HP l/min 0 10 20 30 40 50 60 70 75 80
TOP MULTI-TECH 2 0.55 0.75  

H metres

40 38.5 36 32.5 28 23.1 17.7 12 9 6
TOP MULTI-TECH 4 0.75 1 52 50 46.5 42 36.5 30.5 23.3 15.8 11.9 8

TOP MULTI-TECH 3 – 5

MODEL

Single-phase

POWER (P2) Q m³/h 0 0.6 1.2 1.8 2.4 3 3.6 4.2 4.5 4.8 5.4 6 6.6 7.2
kW HP l/min 0 10 20 30 40 50 60 70 75 80 90 100 110 120
TOP MULTI-TECH 3 0.55 0.75  

H metres

30.5 30 29 27.5 26 24.3 22.2 19.8 18.5 17.2 14.4 11.3 8 4.5
TOP MULTI-TECH 5 0.75 1 41 40 38.5 37 35 32.5 29.5 26.5 24.7 22.9 19.2 15.1 10.7 6

TOP MULTI-TECH

PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 8 PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 9

DIMENSIONS AND WEIGHTPEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 4

MODEL

 

Single-phase

PORT

 

DN

N. STAGES DIMENSIONS

mm

kg
a h
TOP MULTI-TECH 2  

1¼”

3  

 

178

428 9.3
TOP MULTI-TECH 3
TOP MULTI-TECH 4 4 463 10.0
TOP MULTI-TECH 5

ABSORPTION

MODEL

Single-phase

VOLTAGE
230 V 240 V 110 V
TOP MULTI-TECH 2 3.4 A 3.3 A 6.6 A
TOP MULTI-TECH 3 3.6 A 3.5 A 7.2 A
TOP MULTI-TECH 4 3.9 A 3.7 A                     8.0 A
TOP MULTI-TECH 5 3.9 A 3.7 A                     8.0 A

PALLETIZATION

MODEL

Single-phase

GROUPAGE

n. pumps

CONTAINER

n. pumps

TOP MULTI-TECH 2 60 80
TOP MULTI-TECH 3 60 80
TOP MULTI-TECH 4 60 80
TOP MULTI-TECH 5 60 80

Typical installationPEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 5 PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 6

ACCESSORIES (CAN BE ORDERED SEPARATELY)PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps fig 7

Documents / Resources

PEDROLLO Top Multi-Tech Multi-Stage Automatic Submersible Pumps [pdf] Instruction Manual
Top Multi-Tech Multi-Stage Automatic Submersible Pumps, Top Multi-Tech, Multi-Stage Automatic Submersible Pumps

References

Leave a comment

Your email address will not be published. Required fields are marked *