6W ESCUTCHEON TRIM

FOR 6300 SERIES EXIT DEVICES

TEMPLATE: 639309
REV. 2 5-3-22

PULL SIDE FACE OF DOOR

1. 4X TRIM MOUNTING HOLES DRILL ∅1/2 THRU
2. WIRE CHASE HOLE ∅1″ THRU 99 FUNCTIONS ONLY
3. 6300 R/RF – V/VF – C/CF TRIM ACTUATING SHAFT HOLE DRILL ∅1″ THRU 08, 09, 14, 99 FUNCTIONS ONLY
4. 6300M ONLY TRIM ACTUATING SHAFT ∅5/8″ OUTSIDE 08. 09, 14, 99 FUNCTIONS ONLY

NOTES:

1. VERIFY PRINTED TO SCALE
2. REFER TO EXIT DEVICE TEMPLATE FOR BACKSET/DEVICE CENTERLINE
3. DIMENSIONS: ESCUTCHEON – 9″ x 1 13/16″ x 15/16″ (15/16″ DOES NOT INCLUDE LEVER) TOTAL TRIM PROJECTION – 3-1/8″
4. CHECK PDQ WEBSITE FOR MOST RECENT REVISION WWW.PDQLOCKS.COM

PDQ Manufacturing
2230 Embassy Dr.
Lancaster, PA 17603
833-273-7832
833-2 PDQTECH
www.pdglocks.com

Documents / Resources

PDQ PDQ-6W Wide Escutcheon Trim for Use With 6300 Exit Devices [pdf] Instructions PDQ-6W, Wide Escutcheon Trim for Use With 6300 Exit Devices, PDQ-6W Wide Escutcheon Trim for Use With 6300 Exit Devices

References

• User Manual