PAUTIX SP630E LED Controller Owner’s Manual

PAUTIX SP630E LED Controller

PAUTIX SP630E LED Controller

Concise Instructions

Core Features: High-performance low-power 2.4G Bluetooth master control; supports up to 12 lamp types; multi-control (mobile APP, 2.4G touch remote, 2.4G touch 86 box); 4-zone control & unified ALL control; customizable on/off dynamic effects & default startup status; device rename, color correction, multi-timer; 3 music modes (phone mic, player streaming, onboard mic); 5 APP pages (dynamic, static, music, custom, settings) with adaptive content.

Basic Parameters: LED Type: SPICE LED strip + PWM LED strip; Input: DC5V-24V (match LED strip voltage); PWM Output: single channel max 6A,total max 12A; Waterproof: IP30 non-waterproof;

Operating Temp:-20C~60C (-4°F~140°F); Working Mode: RF remote + Balan X Bluetooth APP;

Max ICs: single color/CCT/RGB 600,RGBW 450, RGB CCT 300; Supported SPIICs:

WS2811/2812/2813/2814/2815, TM series, UCS series, GW6205, GS8206/8208 etc.; Supported PWM non-IC: FCOB, SMD 5050/3014/3528/5730/5630 (2/3/4/5/6-pin).

Notes: Match input voltage with LED strip strictly; do not overload output current; use in dry indoor environments only; avoid water and high-temperature heat sources.

Logo

Documents / Resources

PDF thumbnailSP630E LED Controller
Owner's Manual · SP630E LED Controller, SP630E, LED Controller, Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.