lPauNeuhaus 7200-16 Trailing Edge Dimmer
Instruction Manual
Features
- No neutral required
- Soft start
- Suitable for 1-way or 2-way operation
- Overheating protection
- Smooth dimming compatible with most LED
- fittings
Technische Daten
| Dimming method: Supply voltage: Load wattage: Ta: Weight: |
Trailing edge 220-240V AC 50/60Hz 10-350W(1.5A max) 0…+40 °C 100g dnq |
Multi-gang de-roting
| Number of Dimmers | Max. Load per Dimmer |
| 1 | 350W |
| 2 | 250W |
| 3 | 200W |
Installing the dimmer
Wiring the dimmer for the desired application.
Setting the minimum brightness of the lamps.
- Switch the dimmer on.
- Dim the brightness right down using the rotary knob.
- Set the minimum brightness using the set-screw (MIN).
Installing the dimmer and covers.
Operating the dimmer
- You switch the connected lamps on and off by pressing the rotary knob.
- By turning the rotary knob, you dim the lamps brighter or darker.
Important Note!
Only skilled electricians may Install this electrical equipment otherwise there Is the risk of fire or electric shock.
Documents / Resources
 |
Paul Neuhaus 7200-16 Trailing Edge Dimmer [pdf] Instruction Manual 7200-16, Trailing Edge Dimmer, 7200-16 Trailing Edge Dimmer |
