Partsam 165244 Rectangular Trailer Light User Manual

Partsam 165244 Rectangular Trailer Light

INTRODUCTION

A high-performance, adaptable lighting solution, the Partsam 165244 Rectangular Trailer Light is made to improve your trailer’s visibility and safety. This light’s 12V LED design allows it to function as a running, stop, turn, and tail light, keeping your trailer visible in any situation. The Partsam 165244, which retails for $25.99, is a terrific value considering its sturdy construction and effective operation. Long-lasting protection from inclement weather is provided by the polycarbonate lens, and operation is guaranteed even in the most trying conditions thanks to the waterproof design. This light kit is made for maritime vehicles, trucks, trailers, and boats. The Partsam 165244 Rectangular Trailer Light, which was introduced in September 2016, is a great option for car owners searching for dependable lighting options because it blends style and longevity. This product gives you the visibility you need, whether you’re blazing brightly in the sun or towing in the rain.

SPECIFICATIONS

WHAT’S IN THE BOX

• Rectangular Trailer Light
• User Manual

FEATURES

• Stop, tail, turn signals, side marker, side reflex, rear clearance, and rear reflex illumination are among the seven features of the multi-functional design.
• Integrated License Plate Light: Four diodes on the driver’s side light are used to illuminate the license plate.
• High Diode Count: To ensure brilliant and effective lighting, the left light has 22 LEDs, while the right light has 18.

• Broad Compatibility: Perfect for utility boats, trucks, trailers, tractors, dump trailers, campers, RVs, and freight vehicles.
• Sturdy Construction: Constructed using premium parts to guarantee longevity and conductivity.
• DOT-Compliant: Adheres to DOT regulations, guaranteeing road safety and legality.
• IP68 Waterproof: Totally sealed, submersible, and made to resist inclement weather and moisture.

• Welded Construction: For increased longevity, lights are welded together to form a permanent, watertight seal.
• Polycarbonate Lens: This red polycarbonate lens is strong and resilient, able to withstand rough circumstances and road vibration.
• Drainage System: Water cannot harm the circuit board or diodes thanks to an integrated drain hole.
• Shock-Resistant: Made to withstand shocks and impacts when traveling on uneven roads or terrain.
• Low Profile Design: Measuring only 8″ (L) by 3″ (H) by 2-3/4″ (W), this design is elegant and small.

• Effective Circuit Protection: A sealed circuit board keeps dust and moisture from affecting operation.
• Energy-efficient LEDs: Provide maximum brightness using just 12W of power.

SETUP GUIDE

• Unpack Components: Make sure the kit has all the parts it needs, such as the mounting hardware and lights.
• Mounting Surface Preparation: To guarantee good adherence, clean the space where the lights will be mounted.
• Measure and Mark: To ensure accuracy, measure the light locations and mark the mounting locations.
• Drill Holes: Create pilot holes for the kit’s stainless steel screws.
• Light Alignment: Place the lights on the trailer so that they line up with the holes that have already been drilled.
• Secure with Screws: Fasten the lights firmly to the mounting surface using the supplied screws.
• Connect Wiring: Attach the wires to the trailer’s wiring harness’s corresponding terminals.
• Match wires: yellow/green for side markers, brown for tail/running, and red for stop/turn.
• Waterproof Connections: Seal the wire connections with electrical tape or heat-shrink tubing.
• Verify Polarity: To prevent damage, make sure the lights are powered on with the proper polarity.
• Test Functionality: Turn on the lights and check that they illuminate the license plate, stop, tail, and turn signals, among other features.
• Modify Angles: Modify the lights to guarantee enough visibility for any activity.
• Examine Waterproofing: Mist the lights with water to confirm the IP68 waterproof seal.
• Installing a drainage system involves making sure the drain hole is clear to let water out.
• Secure Extra Wiring: To keep stray wires neat and avoid tangling, use zip ties or clips.
• Final Inspection: Before using, make sure the wiring, installation, and light alignment are all correct.

CARE & MAINTENANCE

• Frequent Cleaning: To achieve the best brightness, wipe the lens with a gentle cloth to get rid of dirt and debris.
• Examine Wiring: Look for indications of corrosion, wear, or loose connections on a regular basis.
• Verify Seals: Make that the drain holes and welded seals are still there and unobstructed.
• Steer clear of harsh chemicals: To keep the polycarbonate lens from getting damaged, wash it with a moderate soap and water.
• Test Functionality: To guarantee correct operation, test all lighting features on a regular basis.
• Examine the mounting hardware: To keep the lights from coming loose, tighten the screws from time to time.
• Replace Damaged LEDs: If any diodes stop working properly, replace the lights.
• Guard Against Overvoltage: To avoid damaging the circuit, make sure the power source doesn’t go above 12 volts.
• Examine for Water Intrusion: Look for indications of moisture accumulation within the lens and take prompt action.
• Eliminate Obstacles: To guarantee that water may escape, keep the drain holes free of dirt or debris.
• Reapply Waterproofing: Use heat-shrink tubing or waterproof tape if any connections show through.
• Prevent Impact Damage: Drive carefully to lessen hits or vibrations that could harm the lights.
• Store Properly: Put the lights in a dry, secure place if you must remove them for any reason.
• Examine After Use in Adversities: Look for any indications of water entry following periods of intense rain or submersion.

TROUBLESHOOTING

PROS & CONS

PROS

• Bright 12-watt LED lights for maximum visibility.
• Waterproof design ideal for harsh weather conditions.
• Easy to install with included mounting hardware.
• Low profile, sleek design that suits a variety of vehicles.
• Durable polycarbonate lens that resists cracking.

CONS

• May not fit all trailers or custom applications.
• Some users report light brightness may not be sufficient for larger vehicles.
• Requires 12V power supply.
• Installation may be tricky for those unfamiliar with electrical setups.
• Not suitable for extreme off-road conditions where more robust lighting is needed.

WARRANTY

This product comes with a 1-year warranty from the manufacturer, covering defects in materials and workmanship under normal use.

FREQUENTLY ASKED QUESTIONS

VIDEO – PRODUCT OVERVIEW