PAPIFEED PF023 Smart Automatic Cat Feeder

Safety Instructions & Precautions

• Please do not use wet, canned, or moist food.
• Please do not attempt to repair or modify the pet feeder yourself.
• Please do not use the data cable for any other purpose other than this product.
• Please do not immerse the body and power supply in water or the electronic components will be damaged
• Please do not store this product in a humid place and do not use it for any other purpose than feeding.
• please do not drop any items except dry food into the food storage bucket because it may cause abnormal conditions even pet safety problems.
• Children must be used under the guidance of an adult.
• This product uses four AA batteries (batteries not included).
• Please be sure to unplug the power supply before installing and removing the accessories.
• To prevent food clogging, the particle size should not exceed more than 15mm.
• If you need to use an extension cord, you need to use the same grade of extension cord.
• Using product accessories not provided or recommended by the original manufacturer may lead to unsafe conditions.
• Please check the device after installation and do not turn on the device if there is water on the power cord or plug.
• If you do not use the product for a long time, please remember to remove the battery and unplug the power supply.
• Please place the feeder horizontally. It is recommended to place it against the wall to prevent tripping over the wire or being torn by pets.
• Please read the cautions in the manual and package carefully.

Daily Feeding

If the pet fails to eat up the previous programmed meal, please reduce the next meal portion.

Component Breakdown

Product Specifications

Packing List

Product Hardware Assembly Steps

1. Installation of Food Tank.
2. Connect external power and install food bowl tray.
3. Pour the grain and install the velcro.

Description of Buttons and Indicators

Note:

• Short press [+ 1 to manually dispense food.
• The product is only suitable for 2.4GHz networks (5GHz networks can not be connected).
• Battery power is only for emergency use in case of power failure, please ensure dual power supply for normal use.
• Make sure the feeder and home WiFi are connected, the distance between the two should not be too far apart.(Recommended within 5 meters).

In good working order_l ed Indicator Notice:.

App Download and Use Steps

Software Download and Installation

1. Scan the QR code to download the Smart Life APP.
2. Turn on the Smart Life APP and register your application account.
3. Login to your account.

Play(Android), Or App Store(iOS). Download and install the app by searching “Smart Life” on Google.

Connect the Device

Connect the Device (Turn on Bluetooth & WiFi)

1. Turn on the phone’s Wifi and Bluetooth.
2. Login to the Smart Life app and refresh the page.
3. Select the device you want to add.
4. Enter the 2.4GHz WiFi network and password (the device does not support a 5GHz network).
5. Wait for the device to be connected, and click “Next”.
6. Finally, click the “Finish” button in the upper right corner to enter the feeding page.

Set A Reasonable Feeding Time
Feeding Settings: You can continuously set a daily feeding schedule for your pet.

Note:
The function consumes a lot when battery-powered, and the working time only lasts 20-24 hours, so it is more energy-saving to use a dual power supply.

Troubleshooting Tips

1. Please connect the external power supply before downloading the program.
2. Support 2.4GHz signal, not 5GHz signal.
3. The distance between the feeder and home WiFi should not be too far. make sure both can be connected.

Product Disassembly & Cleaning

Note: In addition to the host part of the feeder other assembled parts can be disassembled and cleaned.

Trouble Shooting

Q&A Trouble Shooting

• Q: Why I can not connect to the WIFI?
• A: Please check if the power supply has been connected, Then make sure you select the 2.4G instead of 5G WIFI. Then connect it again.
• Q: Why feed on the APP but no food dispensing from the feeder?
• A:lf the APP shows the feeding has been succeeded, but no food dispensing from the feeder. Firstly suggest checking if the food tank got enough food . Secondly, if the impellors have been rotated normally.(You can Judge from the sound). Thirdly suggest feeding again for few more times to avoid the signal delay caused by the troubles.(Internet delay).
• Q: Why I can not log in to my Smart Life account?
• A. First, please check if the feeder has been connected to the Wifi properly. Secondly, please check if the account has been occupied by others. Suggest to unload and Reinstall the APP.
• Q: Is it possible to set up a feeder schedule when the feeder is on battery power?
• A: When powered by battery only, you can use all the functions of the APP, including setting a new feeding schedule. In the networked state, the device consumes more power to run all functions, and can only support less than a day with battery power only. (It is recommended to use both battery and power supply in daily use).

100% After Sales Service
We provide an I-year warranty for this appliance.
Please email our support team at [service@papifeed.cn) if you have any questions, attach your order number and describe your problem in your email. We will get back to you within 24 hours.

Scan for more details

www.papifeedpet.com

Documents / Resources

PAPIFEED PF023 Smart Automatic Cat Feeder [pdf] User Manual PF023 Smart Automatic Cat Feeder, PF023, Smart Automatic Cat Feeder, Automatic Cat Feeder, Cat Feeder, Feeder

References

• User Manual