Panthella Portable V2 Table Lamp
Product Information: Panthella Portable V2
- Design: Verner Panton
- Dimensions: 238mm / 9.4″
- Power Consumption: LED 2.5W
- Power Input: DC 5V, 1.5A SELV
- Maximum Weight Capacity: 0.5kg / 1.1lbs
- Isolation Class: Class III
- IP Rating: IP44
Product Usage Instructions
- Ensure that the product is placed on a flat and stable surface.
- Connect the power input to a DC 5V, 1.5A SELV power source.
- Press the power button to turn on the light.
- To adjust the brightness, press and hold the power button until the desired brightness is reached.
- Press the power button again to turn off the light.
- Do not exceed the maximum weight capacity of 0.5kg / 1.1lbs.
- Ensure that the product is used in a dry environment as it has an IP44 rating for protection against solid objects and water splashes.
- Do not disassemble or attempt to repair the product yourself. Contact a qualified technician for any repairs or maintenance.
- Light source
LED 2,5W - Voltage/frequency
DC 5V1.5A SELV
- Weight
Max. 0,5 kg/1.1 lbs - Protection class
IP 44 - Ingress protection
IP 44
Wipe off dust with a dry, soft cloth. Remove greasy spots etc. with a soft cloth damp-ened in lukewarm water (<50° C) with a mild detergent. Never use detergents containing abrasives and solvents.
The light source contained in this luminaire shall only be replaced by the manufacturer or a qualified electrician.
Lock:
Unlock:
Press and hold >5 sec
Low battery level:
Charging:
Replace batteries:
Documents / Resources
![]() |
Panthella Portable V2 Table Lamp [pdf] Instruction Manual Portable V2 Table Lamp, Portable V2, Table Lamp, Lamp |