Danfoss AK-XM 101A Transmitter Fault Detection
ਨਿਰਧਾਰਨ
- ਮਾਡਲ: ਏਕੇ-ਐਕਸਐਮ 101ਏ
- ਮਾਡਲ: ਏਕੇ-ਐਕਸਐਮ 205ਏ
- ਮਾਡਲ: ਏਕੇ-ਐਕਸਐਮ 205ਬੀ
- ਭਾਗ ਨੰਬਰ: 080R9226 AN00008642722201-000601
- ਰੋਧਕ: 47 kohm AKS 32R
ਇੰਸਟਾਲੇਸ਼ਨ ਗਾਈਡ
- When using AKS 32R, it should be connected to the controller module. If it is connected to an extension module, the enclosed resistor must be mounted to ensure the proper detection of any sensor errors.
ਨੁਕਸ ਦਾ ਪਤਾ ਲਗਾਉਣਾ
If an AKS 32R is to transmit a signal to two, three, four or five extension modules only two resistances have to be connected – one at either end of the signal.
ਅਨੁਕੂਲਤਾ
- The resistances are left out if the remaining controllers are of another type.
ਅਕਸਰ ਪੁੱਛੇ ਜਾਂਦੇ ਸਵਾਲ
What should I do if I encounter sensor errors?
Ensure that the AKS 32R is properly connected to the controller module and that the enclosed resistor is mounted if using an extension module for accurate sensor error detection.
ਦਸਤਾਵੇਜ਼ / ਸਰੋਤ
 |
Danfoss AK-XM 101A Transmitter Fault Detection [pdf] ਇੰਸਟਾਲੇਸ਼ਨ ਗਾਈਡ AK-XM 101A, AK-XM 205A, AK-XM 205B, AK-XM 101A Transmitter Fault Detection, AK-XM 101A, Transmitter Fault Detection, Fault Detection |