OXEO KICK75 Hybrid Profile Custom Mechanical Keyboard
System Selection
Connection Mode Selection
- In the wired mode, it uses a data cable to connect with the device.
Wireless Device Connection
FN + 1 2 3 Bluetooth 1 / Bluetooth 2 / Bluetooth 3/ 2.4Ghz
- Short press to switch between devices; long press for 3 seconds to enter pairing mode.
- Plug the 2.4G receiver into your computer after pressing FN + 4.
Knob & RGB
Backlight Settings
Sidelight Settings
Sleep Mode Setting
Turn the Sleep mode on or off- After 6 minutes of no use, the sleep mode will be entered automatically with all lights turned off.
Battery Indicator
Enable/disable permanent battery level display
Other Key Combos
Access the Insert function
Access the End function
Factory Reset
Long-press for 3 seconds to restore factory settings
NuPhylO
- Visit nuphy.io to use the product with the web driver/configurator.
- If for any reason your keyboard cannot be detected under the wired mode, feel free to contact our technical support.
- Founded by a small team of passionate dreamers, NuPhy has always been at war with boredom and uninspiring designs.
CUSTOMER SERVICE
- NuPhy & Reo Studio
- sentice@nuphy.com
- Made in China
- Copyright 2025
- Designed by NuPhy.
- All rights reserved.
Documents / Resources
 |
OXEO KICK75 Hybrid Profile Custom Mechanical Keyboard [pdf] User Guide NuPhyIO, KICK75 Hybrid Profile Custom Mechanical Keyboard, KICK75, Hybrid Profile Custom Mechanical Keyboard, Profile Custom Mechanical Keyboard, Custom Mechanical Keyboard, Mechanical Keyboard, Keyboard |