OUTWATER RGB12 RGB LED Controller 12V User Manual
OPERATING INSTRUCTIONS FOR LED-RGB12-CON
Specifications
Working Temperature: – 20-60°C
Supply Voltage: DC12~24V
Product Size: L 62 x W 35 x H 23mm
Package Size: L 105 x W 65 x H 55mm
Net Weight 50g
Gross Weight: 70g
Output: Three CMOS drain – open output
Connecting Mode: Common anode
Max Load Current: 2A each colo
Control Method:
Use the IR remote to control the LED controller. The remote has 24 buttons, the functions of each are displayed in the table below.
| Brightness + Speed Up | Brightness – Speed Down | OFF | ON |
| Static Red | Static Green | Static Blue | Static White |
| Static Orange | Static Pea Green | Static Dark Blue | 7 Color Jumpy |
| Static Dark Yellow | Static Cyan | Static Brown | All Fade Out & Fade In |
| Static Yellow | Static Light Blue | Static Pink | 7 Color Fade Change |
| Static Straw Yellow | Static Sky Blue | Static Purple | 3 Base Color |
Panel Specification and Connecting Drawing
Warnings
- Supply voltage of this product is DC12V~24V. Never connect AC220V.
- Never connect two wires directly in case of a short circuit.
- Lead wire should be connected correctly matching the common node.
- The warranty of this product is one year. During this period we guarantee replacement or repairing with no charge but exclude the artificial situation of damaged or overload working.
Documents / Resources
 |
OUTWATER RGB12 RGB LED Controller 12V [pdf] User Manual RGB12 RGB LED Controller 12V, RGB12, RGB LED Controller 12V, Controller 12V |
