outinput PC340 2K Window Camera Instruction Manual

outinput PC340 2K Window Camera

Attention

• Keep the device away from water, fire, humidity or hot environments.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• For indoor use only.
• Do not disassemble, repair or modify the product.
• Do not use the product if the casing has been broken. Danger of electric shock.
• Never touch the product with wet hands.
• Do not expose to heavy rain or any type of moisture.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequately shielded from external RF(radio frequency) energy.
• Do not use this product in health care facilities, Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy,
• Do not use this product near water for example near a bath tub, wash bow, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
• The product should be kept free from excessive smoke, dust or high temperature and vibration,
• This product should not be exposed to direct sunlight
• Do not place heavy objects on top of the product.
• When you leave the product unused fora long time unplug the product from the power outlet.
• Product should be kept away from heat sources such as radiators, cookers etc. It should not be placed in rooms where the temperature is less than O degrees or greater than 40 degrees. Damp basements should also be avoided.
• This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: -10t 500C (-140F N1220F)
• Operating Humidity: 100/0900/0RH, Non-condensing
• Please read and follow the above safety information when operating the device.
• We cannot guarantee that no accidents or damage will occur due to improper use of the device.

Please use this product with care and operate at your own risk.

What’s in the Box

Product Diagram

1. Lens
2. Speaker
3. Indicator Light
4. Microphone
5. Power Interface
6. Reset Button
7. MicroSD Card Slot

App Setup Instructions

Download the App

• Scan the QR code below to download the [outinput] App with your phone.

Ensure Wi-Fi connected and Bluetooth enabled.

• Make sure your phone is connected to a 2.4GHz Wi-Fi network. (5GHz networks are not supported)
• Make sure the Bluetooth function is enabled.

Complete Registration

• Open the App and follow the on-screen instructions to complete the registration process.

Power On the Camera

• Connect the camera to power using the included USB charger. Wait until you hear a beep from the camera and wait for the connection.
• If you do not hear a beep, please long press the reset button.

Camera Connection

1. Open the App, click Add Device”, it will search for the camera automatically.
2. Follow the on-screen instructions to add the camera
3. Ensure the Wi-Fi is 2.4GHz and enter the password.
4. Tap to start pairing and wait for it to finish.

Indicator Light

Mounting Instructions

1. Clean Window Glass
   Determine the installation location and clean both inside and outside of the window glass.
2. Install Magnetic Sticker
   Choose one of the magnetic stickers, peel off the protective film, and stick it on the inner window glass.
3. Mount Camera
   Face the front of the camera to the window glass and attach it firmly on the magnetic sticker.
4. Tidy Cords
   Use the cable organizer to keep your cables from being messy and tangled.

Function Introduction

• Siren: Manually activate the alarm,
• Sound Detection: Receive notifications when sound is detected.
• Motion Detection: Get notifications when movement is detected.
• Close-up Tracking : Zooms in on the image when it detects movement of a person.
• Only supported when viewing in real time.
• Privacy Mode: Stop all camera functions, resume when disabled.
• Playback: View historical videos (TF card required).
• Messages: Check notifications from the camera.
• Direction Control: Only support 3x zoom in or zoom out during video preview.
• Cloud Storage: Access video playback without a TF card.
• Local Storage: Support continuous local recording with up to 256GB Micro SD Card.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

CE-RED

• This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

• Hereby,ThinkTech Innovation lnc declares that the device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ElJ For the declaration of conformity, visit the Web: https://www.out-input.com
• This product can be used across EU member states.
• Due to the used enclosure material, the product shall only be connected to a USB interface of version 2.0 or higher.
• The adapter shall be installed near the equipment and shall be easily accessible.
• Do not use the device in the environment at too high or too low temperature, never expose the device under strong sunshine or too wet environment.

RF Exposure Information

• This Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20cm between the device and the human body.
• To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
• Restricted to indoor use.

Specifications

• Product Name: 2K Window Camera
• Resolution: 2K 3MP (2304H x 1296V)
• Wi-Fi Cover Range: 50N70M (Barrier-free)
• Video Compression: H.264/H.265 high profile
• Power Consumption: 5W (Maximum)
• Power Input: Type-C 5V/1A
• Power Adapter: DC 5V
• Cloud Storage: Supported
• Local Storage: Supports MicroSD card (up to 256GB)
• Image Enhancement: WDR, 3D noise reduction
• Wireless Encryption: WEP / WPA / WPA2
• Wireless Connection: 2.4G 802.11 b/g/n
• Supported Platform: Android / iOS

Warranty

• Enjoy a 30-day return policy
• 12-month limited warranty for peace of mind
• Timely Customer service: support@out-input.com

CONTACT

• ThinkTech Innovation lnc
• 4888 Dexter Dr #100, Plano, TX 75093, USA
• EU REP VAT SPEED SL
• CALLE ANTONIO SALVADOR N99.1, 28026 MADRID, SPAIN
• UK REP EVATOST CONSULTING LTD
• OFFICE 101 32 THREADNEEDLE STREET, LONDON, UNITED KINGDOM, EC2R 8AY
• support@out-input.com
• www.out-input.com