OUKITEL WP58 Pro Camera Instructions

OUKITEL WP58 Pro Camera

Front View & Interface Features

Accessories

• TYPE-C
  

Battery

WP58 Series includes an internal battery. You can track your battery status with the icon showed on the top right of the screen.

Warning

Use only OUKITEL-approved batteries specifically designed for you phone.
Incompatible batteries can cause serious iniuries or damage to your phone.
Never place batteries or phones on or in heating devices such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.

Rear & Side Features Overview

How to insert the card

• To make sure your device is able to make calls, insert the SIM card in the following order.
• insert and press the ejector pin into the hole in the side to pop the card tray.
  
• With the device facing up, insert the cardholder into the device in the direction of the arrow.
  

How to boot

Non-removable battery
Press the power button for 3-5 seconds to boot

How to send SMS, MMS SMS

• Open the SMS app
• Select New Information
• Enter a phone number or browse your contacts
• Select Edit Information and enter your text
• Send

language switching settings

• Main menu-settings system–language and input method
• Language and input method–language–language adding
• Select the language you need, the system Will automatically
• jump back to the language interface
• Select the icon after the language bar and drag it to the first one

SAR

• The maximum electromagnetic Specific Absorption Rate (SAR) of this product is ≤2.0W/kg
• In line with the requirements of the national standard

EN 62209-1:2016; EN 62209-2:2010; EN 62479:2010;
EN 50360:2017; EN 50566:2017;

Safety Guidelines

Safety – In order to ensure safety during use of the product, you must strictly abide by the follow

• The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters.
  Overheating of the battery can cause an explosion
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
• If the device is equipped with a non-removable battery, do not replace the battery by yourself to avoid damaging the battery or the device.
• Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
• Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
• Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, Which may result in internal short-circuit and overheating of the battery.
• The company does not bear responsibility for accidents caused by non-standard related charging equipment.

If you want to read the full CE compliance, please check this Link: http://www.oukitel.com

Maintenance

• Thoroughly understand the maintenance of this device to use the device more safely and effectively, and extend the service life of the device as much as possible.
• Please follow the instructions in the manual to open the device, disassemble the accessories, and do not try other Please avoid dropping, knocking, or shaking your device.
• Rough handling of the device can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
• Do not use chemical solvents or detergents to clean your device. Wipe the device case with a soft cotton cloth dampened with water and mild soap.
• Clean the lens with a clean, dry, soft cloth. (Example camera lens) and display.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

Regulatory Compliance & Cautions

1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
   DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
3. The product shall only be connected to a USB interface of version USB2.0. 4. Adapter shall be installed near the equipment and shall be easily accessible.
4. Operation temperature: -20°C to 55°C.
5. The plug considered as disconnect device of adapter.
6. SAR: The device complies with RF specifications when the device used at 5mm from your body (SAR limit 2.0 W/Kg), The device is in compliance with the requirements.

Restrictions in the 5 GHz band:

According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES),

France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz

	ES	LU	RO	CZ	FR	HU	SI
	DK	HR	BE	BG	DE	EE	IE
	EL	IT	Cy	LV	LT	SK	MT
	NL	AT	PL	PT	FI	SE	LI
	TR	NO	CH	IS

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device WP58 (2ANMU-WP58) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested for typical operations 10mm from the body. To maintain compliance with FCC RF exposure requirements, 10mm separation distance should. maintained to the user’s bodies.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following.

measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The power delivered by the charger must be between min 10 Watts required by the radio equipment, and max 33 Watts in order to achieve the maximum charging speed.

Customer Support

www.oukitel.com
Android is a trademark of Google LLC.
Manufacturer Name : Shenzhen Yunji Intelligent Technology CO., LTD
Manufacturer Address: 202, Building A2, Silicon Valley Power Intelligent Terminal Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen China