C1 Android 15 Cell Phone
Specifications:
- Product Name: Hotspot(10mm)
- Transmission Power: 1.126W/kg
Product Information:
The Hotspot(10mm) is a compact and portable device designed for
wireless internet connectivity. With a transmission power of
1.126W/kg, it provides reliable and efficient data
transmission.
Product Usage Instructions:
Step 1: Power On
Press and hold the power button to turn on the Hotspot(10mm).
Wait for the device to boot up.
Step 2: Connectivity
Once powered on, locate the Hotspot(10mm) network on your
device’s Wi-Fi settings. Connect to the network using the provided
credentials.
Step 3: Usage
You can now start using the Hotspot(10mm) to access the internet
wirelessly. Enjoy fast and reliable connectivity for your
devices.
Frequently Asked Questions (FAQ):
Q: How long is the battery life of the Hotspot(10mm)?
A: The battery life of the Hotspot(10mm) depends on usage but
typically lasts for X hours on a full charge.
Q: Can I connect multiple devices to the Hotspot(10mm)
simultaneously?
A: Yes, the Hotspot(10mm) supports simultaneous connections for
multiple devices, allowing you to share the internet
connection.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC/IC RF Radiation Exposure and SAR Statements The Smart Phone C1 has been tested for body-worn Specific Absorption Rate(SAR) compliance. The FCC/IC has established detailed SAR requirements and has established that these requirements. RF Exposure Information The radio module has been evaluated under FCC Bulletin C95.1 and IEEE 1528 and found to be compliant to RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. The highest reported SAR level for usage near the body (10mm) is 0.934W/kg, Body Simultaneous transmission is 1.418W/kg at the same time.SAR level for usage near the Head is 1.030 W/kg and Head simultaneous transmission is 1.534 W/kg. SAR level for usage near the Hotspot(10mm) is 0.621 W/kg and
Hotspot(10mm) simultaneous transmission is 1.126W/kg
Documents / Resources
 |
OUKITEL C1 Android 15 Cell Phone [pdf] User Manual S6527-06AT, C1 Android 15 Cell Phone, C1, Android 15 Cell Phone, 15 Cell Phone, Cell Phone, Phone |